diff --git a/MAX31855.cpp b/MAX31855.cpp
new file mode 100644
index 0000000..f928ed4
--- /dev/null
+++ b/MAX31855.cpp
@@ -0,0 +1,147 @@
+#include "MAX31855.h"
+
+#if defined (__AVR_ATmega640__)  \
+|| defined (__AVR_ATmega1280__) \
+|| defined (__AVR_ATmega1281__) \
+|| defined (__AVR_ATmega2560__) \
+|| defined (__AVR_ATmega2561__)
+
+// Arduino Mega
+#define DATAIN 50//MISO
+#define DATAOUT 51//MOSI
+#define SPICLOCK  52//sck
+#define SS 53
+
+#elif defined (__AVR_ATmega168__)  \
+ || defined (__AVR_ATmega168P__) \
+ || defined (__AVR_ATmega88P__)  \
+ || defined (__AVR_ATmega88__)   \
+ || defined (__AVR_ATmega48P__)  \
+ || defined (__AVR_ATmega48__)   \
+ || defined (__AVR_ATmega328P__)
+
+#define DATAIN 12//MISO
+#define DATAOUT 11//MOSI
+#define SPICLOCK  13//sck
+#define SS 10
+
+#endif
+
+byte clr;
+
+MAX31855::MAX31855(uint8_t csPin, uint32_t updateIntervalMs){
+    this->status.csPin = csPin;
+    
+    this->status.stat = 0;
+    this->status.temperature = 0.0;
+    
+    
+    this->updateIntervalMs = updateIntervalMs;
+    this->lastUpdate = 0;
+    
+    for(uint8_t i = 0; i< NUMTCAVGSAMPLES; i++){
+    	readings[i] = 0;
+    }
+    counter = 0;
+}
+
+void MAX31855::setup(){
+	if(!setupDone){
+		setupDone = true;
+		pinMode(DATAOUT, OUTPUT);
+		pinMode(SPICLOCK,OUTPUT);
+		pinMode(DATAIN, INPUT);
+		//pinMode(10,OUTPUT);
+		digitalWrite(SS,HIGH); // set the pull up on the SS pin (SPI doesn't work otherwise!!)
+
+		clr = 0;
+		//The SPI control register (SPCR) has 8 bits, each of which control a particular SPI setting.
+
+		// SPCR
+		// | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |0000000000000000000
+		// | SPIE | SPE | DORD | MSTR | CPOL | CPHA | SPR1 | SPR0 |
+
+		// SPIE - Enables the SPI interrupt when 1
+		// SPE - Enables the SPI when 1
+		// DORD - Sends data least Significant Bit First when 1, most Significant Bit first when 0
+		// MSTR - Sets the Arduino in master mode when 1, slave mode when 0
+		// CPOL - Sets the data clock to be idle when high if set to 1, idle when low if set to 0
+		// CPHA - Samples data on the falling edge of the data clock when 1, rising edge when 0'
+		// SPR1 and SPR0 - Sets the SPI speed, 00 is fastest (4MHz) 11 is slowest (250KHz)
+
+		SPCR = (1<<SPE)|(1<<MSTR)|(1<<CPHA);// SPI enable bit set, master, data valid on falling edge of clock
+
+		clr=SPSR;
+		clr=SPDR;
+		//Serial.println("setup done");
+	}
+	pinMode(status.csPin, OUTPUT);
+	digitalWrite(status.csPin, HIGH);
+	
+	// take one reading and fill the array
+	readThermocouple(&status);
+	
+	for(uint8_t i = 0; i< NUMTCAVGSAMPLES; i++){
+    	readings[i] = status.temperature;
+    }
+}
+
+char MAX31855::spi_transfer(volatile char data)
+{
+  SPDR = data; // Start the transmission
+  while (!(SPSR & (1 << SPIF))) // Wait the end of the transmission
+  {
+  };
+  return SPDR; // return the received byte
+}
+
+void MAX31855::readThermocouple(struct max31855Status* input) {
+  digitalWrite(input->csPin, LOW);
+
+  uint32_t result = 0x0000;
+  byte reply = 0;
+
+  char data = 0; // dummy data to write
+
+  for (int i = 0; i < 4; i++) { // read the 32 data bits from the MAX31855
+    reply = spi_transfer(data);
+    result = result << 8;
+    result |= reply;
+  }
+  //Serial.print("Read result is: ");
+  //Serial.print(result, BIN);
+
+  result >>= 18;
+
+  uint16_t value = 0xFFF & result; // mask off the sign bit and shit to the correct alignment for the temp data
+
+  input->stat = reply & B111;
+
+  input->temperature = value * 0.25;
+
+  digitalWrite(input->csPin, HIGH);
+
+}
+
+void MAX31855::update(){
+    if(millis() - lastUpdate >= updateIntervalMs){
+        lastUpdate = millis();
+        
+        readThermocouple(&status);
+        
+        //remove this after testing! haha
+        //status.temperature = random(25, 30);
+        //status.stat = 0;
+        
+        readings[counter] = status.temperature;
+        counter++;
+        if(counter>=NUMTCAVGSAMPLES){
+        	counter = 0;
+       	}
+       	double total = 0;
+       	for(uint8_t i = 0; i< NUMTCAVGSAMPLES; i++){
+        	total += readings[i];
+        }
+        temperature = total / NUMTCAVGSAMPLES;
+    }
+}
diff --git a/MAX31855.h b/MAX31855.h
new file mode 100644
index 0000000..8944c88
--- /dev/null
+++ b/MAX31855.h
@@ -0,0 +1,43 @@
+#ifndef MAX31855KASA_H_
+#define MAX31855KASA_H_
+
+#include <Arduino.h>
+
+#define NUMTCAVGSAMPLES 10
+
+static bool setupDone;
+
+typedef struct max31855Status {
+  double temperature;
+  uint8_t stat;
+  uint8_t csPin;
+};
+
+class MAX31855 {
+    private:
+        
+        uint32_t updateIntervalMs, lastUpdate;
+        max31855Status status;
+        double temperature;
+        
+        uint8_t counter;
+        double readings[NUMTCAVGSAMPLES];
+        
+        static char spi_transfer(volatile char);
+        static void readThermocouple(struct max31855Status*);
+        
+        
+    public:
+        MAX31855(uint8_t, uint32_t);
+        void setup();
+        double getTemperature(){
+            return temperature;
+        }
+        uint8_t getStatus(){
+            return status.stat;
+        }
+        void update();
+        
+};
+
+#endif
diff --git a/Release/Adafruit_GFX.cpp.d b/Release/Adafruit_GFX.cpp.d
new file mode 100644
index 0000000..6ff0863
--- /dev/null
+++ b/Release/Adafruit_GFX.cpp.d
@@ -0,0 +1,45 @@
+Adafruit_GFX.cpp.o: ../Adafruit_GFX.cpp ../Adafruit_GFX.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ ../glcdfont.c
+
+../Adafruit_GFX.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+../glcdfont.c:
diff --git a/Release/Adafruit_GFX.cpp.o b/Release/Adafruit_GFX.cpp.o
new file mode 100644
index 0000000..8024054
Binary files /dev/null and b/Release/Adafruit_GFX.cpp.o differ
diff --git a/Release/Adafruit_MAX31855.cpp.d b/Release/Adafruit_MAX31855.cpp.d
new file mode 100644
index 0000000..50e803f
--- /dev/null
+++ b/Release/Adafruit_MAX31855.cpp.d
@@ -0,0 +1,42 @@
+Adafruit_MAX31855.cpp.o: ../Adafruit_MAX31855.cpp ../Adafruit_MAX31855.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.h
+
+../Adafruit_MAX31855.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.h:
diff --git a/Release/Adafruit_MAX31855.cpp.o b/Release/Adafruit_MAX31855.cpp.o
new file mode 100644
index 0000000..ec19bc1
Binary files /dev/null and b/Release/Adafruit_MAX31855.cpp.o differ
diff --git a/Release/Adafruit_SPITFT.cpp.d b/Release/Adafruit_SPITFT.cpp.d
new file mode 100644
index 0000000..5c7dc4b
--- /dev/null
+++ b/Release/Adafruit_SPITFT.cpp.d
@@ -0,0 +1,53 @@
+Adafruit_SPITFT.cpp.o: ../Adafruit_SPITFT.cpp ../Adafruit_SPITFT.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.h \
+ ../Adafruit_GFX.h ../Adafruit_SPITFT_Macros.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h
+
+../Adafruit_SPITFT.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.h:
+
+../Adafruit_GFX.h:
+
+../Adafruit_SPITFT_Macros.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h:
diff --git a/Release/Adafruit_SPITFT.cpp.o b/Release/Adafruit_SPITFT.cpp.o
new file mode 100644
index 0000000..7b174e8
Binary files /dev/null and b/Release/Adafruit_SPITFT.cpp.o differ
diff --git a/Release/Adafruit_ST7735.cpp.d b/Release/Adafruit_ST7735.cpp.d
new file mode 100644
index 0000000..78a8bd1
--- /dev/null
+++ b/Release/Adafruit_ST7735.cpp.d
@@ -0,0 +1,51 @@
+Adafruit_ST7735.cpp.o: ../Adafruit_ST7735.cpp ../Adafruit_ST7735.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ ../Adafruit_GFX.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h
+
+../Adafruit_ST7735.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+../Adafruit_GFX.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h:
diff --git a/Release/Adafruit_ST7735.cpp.o b/Release/Adafruit_ST7735.cpp.o
new file mode 100644
index 0000000..549e8ce
Binary files /dev/null and b/Release/Adafruit_ST7735.cpp.o differ
diff --git a/Release/MAX31855.cpp.d b/Release/MAX31855.cpp.d
new file mode 100644
index 0000000..7e73b95
--- /dev/null
+++ b/Release/MAX31855.cpp.d
@@ -0,0 +1,39 @@
+MAX31855.cpp.o: ../MAX31855.cpp ../MAX31855.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h
+
+../MAX31855.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
diff --git a/Release/MAX31855.cpp.o b/Release/MAX31855.cpp.o
new file mode 100644
index 0000000..60a7439
Binary files /dev/null and b/Release/MAX31855.cpp.o differ
diff --git a/Release/arduino.ar b/Release/arduino.ar
new file mode 100644
index 0000000..5e8eb7b
Binary files /dev/null and b/Release/arduino.ar differ
diff --git a/Release/core/core/CDC.cpp.d b/Release/core/core/CDC.cpp.d
new file mode 100644
index 0000000..6ff2845
--- /dev/null
+++ b/Release/core/core/CDC.cpp.d
@@ -0,0 +1,35 @@
+core/core/CDC.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/CDC.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
diff --git a/Release/core/core/CDC.cpp.o b/Release/core/core/CDC.cpp.o
new file mode 100644
index 0000000..72e4e5d
Binary files /dev/null and b/Release/core/core/CDC.cpp.o differ
diff --git a/Release/core/core/HardwareSerial.cpp.d b/Release/core/core/HardwareSerial.cpp.d
new file mode 100644
index 0000000..e3ae282
--- /dev/null
+++ b/Release/core/core/HardwareSerial.cpp.d
@@ -0,0 +1,41 @@
+core/core/HardwareSerial.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial_private.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial_private.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h:
diff --git a/Release/core/core/HardwareSerial.cpp.o b/Release/core/core/HardwareSerial.cpp.o
new file mode 100644
index 0000000..1eb9aba
Binary files /dev/null and b/Release/core/core/HardwareSerial.cpp.o differ
diff --git a/Release/core/core/HardwareSerial0.cpp.d b/Release/core/core/HardwareSerial0.cpp.d
new file mode 100644
index 0000000..92f361d
--- /dev/null
+++ b/Release/core/core/HardwareSerial0.cpp.d
@@ -0,0 +1,41 @@
+core/core/HardwareSerial0.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial0.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial_private.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial_private.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h:
diff --git a/Release/core/core/HardwareSerial0.cpp.o b/Release/core/core/HardwareSerial0.cpp.o
new file mode 100644
index 0000000..6ad0873
Binary files /dev/null and b/Release/core/core/HardwareSerial0.cpp.o differ
diff --git a/Release/core/core/HardwareSerial1.cpp.d b/Release/core/core/HardwareSerial1.cpp.d
new file mode 100644
index 0000000..ff00df7
--- /dev/null
+++ b/Release/core/core/HardwareSerial1.cpp.d
@@ -0,0 +1,41 @@
+core/core/HardwareSerial1.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial1.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial_private.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial_private.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h:
diff --git a/Release/core/core/HardwareSerial1.cpp.o b/Release/core/core/HardwareSerial1.cpp.o
new file mode 100644
index 0000000..6b30f3a
Binary files /dev/null and b/Release/core/core/HardwareSerial1.cpp.o differ
diff --git a/Release/core/core/HardwareSerial2.cpp.d b/Release/core/core/HardwareSerial2.cpp.d
new file mode 100644
index 0000000..a750f5e
--- /dev/null
+++ b/Release/core/core/HardwareSerial2.cpp.d
@@ -0,0 +1,41 @@
+core/core/HardwareSerial2.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial2.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial_private.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial_private.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h:
diff --git a/Release/core/core/HardwareSerial2.cpp.o b/Release/core/core/HardwareSerial2.cpp.o
new file mode 100644
index 0000000..6c1af32
Binary files /dev/null and b/Release/core/core/HardwareSerial2.cpp.o differ
diff --git a/Release/core/core/HardwareSerial3.cpp.d b/Release/core/core/HardwareSerial3.cpp.d
new file mode 100644
index 0000000..62b78ab
--- /dev/null
+++ b/Release/core/core/HardwareSerial3.cpp.d
@@ -0,0 +1,41 @@
+core/core/HardwareSerial3.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial3.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial_private.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial_private.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h:
diff --git a/Release/core/core/HardwareSerial3.cpp.o b/Release/core/core/HardwareSerial3.cpp.o
new file mode 100644
index 0000000..2319250
Binary files /dev/null and b/Release/core/core/HardwareSerial3.cpp.o differ
diff --git a/Release/core/core/IPAddress.cpp.d b/Release/core/core/IPAddress.cpp.d
new file mode 100644
index 0000000..34748b0
--- /dev/null
+++ b/Release/core/core/IPAddress.cpp.d
@@ -0,0 +1,41 @@
+core/core/IPAddress.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/IPAddress.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/IPAddress.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/IPAddress.h:
diff --git a/Release/core/core/IPAddress.cpp.o b/Release/core/core/IPAddress.cpp.o
new file mode 100644
index 0000000..a6da29d
Binary files /dev/null and b/Release/core/core/IPAddress.cpp.o differ
diff --git a/Release/core/core/PluggableUSB.cpp.d b/Release/core/core/PluggableUSB.cpp.d
new file mode 100644
index 0000000..3af12c3
--- /dev/null
+++ b/Release/core/core/PluggableUSB.cpp.d
@@ -0,0 +1,38 @@
+core/core/PluggableUSB.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/PluggableUSB.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/PluggableUSB.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/PluggableUSB.h:
diff --git a/Release/core/core/PluggableUSB.cpp.o b/Release/core/core/PluggableUSB.cpp.o
new file mode 100644
index 0000000..e42e62b
Binary files /dev/null and b/Release/core/core/PluggableUSB.cpp.o differ
diff --git a/Release/core/core/Print.cpp.d b/Release/core/core/Print.cpp.d
new file mode 100644
index 0000000..2c47eab
--- /dev/null
+++ b/Release/core/core/Print.cpp.d
@@ -0,0 +1,35 @@
+core/core/Print.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
diff --git a/Release/core/core/Print.cpp.o b/Release/core/core/Print.cpp.o
new file mode 100644
index 0000000..73a17c6
Binary files /dev/null and b/Release/core/core/Print.cpp.o differ
diff --git a/Release/core/core/Stream.cpp.d b/Release/core/core/Stream.cpp.d
new file mode 100644
index 0000000..51934cc
--- /dev/null
+++ b/Release/core/core/Stream.cpp.d
@@ -0,0 +1,35 @@
+core/core/Stream.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
diff --git a/Release/core/core/Stream.cpp.o b/Release/core/core/Stream.cpp.o
new file mode 100644
index 0000000..3655259
Binary files /dev/null and b/Release/core/core/Stream.cpp.o differ
diff --git a/Release/core/core/Tone.cpp.d b/Release/core/core/Tone.cpp.d
new file mode 100644
index 0000000..30a2b56
--- /dev/null
+++ b/Release/core/core/Tone.cpp.d
@@ -0,0 +1,35 @@
+core/core/Tone.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Tone.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
diff --git a/Release/core/core/Tone.cpp.o b/Release/core/core/Tone.cpp.o
new file mode 100644
index 0000000..31b0db3
Binary files /dev/null and b/Release/core/core/Tone.cpp.o differ
diff --git a/Release/core/core/USBCore.cpp.d b/Release/core/core/USBCore.cpp.d
new file mode 100644
index 0000000..ef35b14
--- /dev/null
+++ b/Release/core/core/USBCore.cpp.d
@@ -0,0 +1,38 @@
+core/core/USBCore.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBCore.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/PluggableUSB.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/PluggableUSB.h:
diff --git a/Release/core/core/USBCore.cpp.o b/Release/core/core/USBCore.cpp.o
new file mode 100644
index 0000000..fedccb8
Binary files /dev/null and b/Release/core/core/USBCore.cpp.o differ
diff --git a/Release/core/core/WInterrupts.c.d b/Release/core/core/WInterrupts.c.d
new file mode 100644
index 0000000..39383bb
--- /dev/null
+++ b/Release/core/core/WInterrupts.c.d
@@ -0,0 +1,17 @@
+core/core/WInterrupts.c.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WInterrupts.c \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
diff --git a/Release/core/core/WInterrupts.c.o b/Release/core/core/WInterrupts.c.o
new file mode 100644
index 0000000..30c1ed0
Binary files /dev/null and b/Release/core/core/WInterrupts.c.o differ
diff --git a/Release/core/core/WMath.cpp.d b/Release/core/core/WMath.cpp.d
new file mode 100644
index 0000000..cde07c8
--- /dev/null
+++ b/Release/core/core/WMath.cpp.d
@@ -0,0 +1,2 @@
+core/core/WMath.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WMath.cpp
diff --git a/Release/core/core/WMath.cpp.o b/Release/core/core/WMath.cpp.o
new file mode 100644
index 0000000..5841def
Binary files /dev/null and b/Release/core/core/WMath.cpp.o differ
diff --git a/Release/core/core/WString.cpp.d b/Release/core/core/WString.cpp.d
new file mode 100644
index 0000000..40c576b
--- /dev/null
+++ b/Release/core/core/WString.cpp.d
@@ -0,0 +1,5 @@
+core/core/WString.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
diff --git a/Release/core/core/WString.cpp.o b/Release/core/core/WString.cpp.o
new file mode 100644
index 0000000..0a42b03
Binary files /dev/null and b/Release/core/core/WString.cpp.o differ
diff --git a/Release/core/core/abi.cpp.d b/Release/core/core/abi.cpp.d
new file mode 100644
index 0000000..c94b180
--- /dev/null
+++ b/Release/core/core/abi.cpp.d
@@ -0,0 +1,2 @@
+core/core/abi.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/abi.cpp
diff --git a/Release/core/core/abi.cpp.o b/Release/core/core/abi.cpp.o
new file mode 100644
index 0000000..950017d
Binary files /dev/null and b/Release/core/core/abi.cpp.o differ
diff --git a/Release/core/core/hooks.c.d b/Release/core/core/hooks.c.d
new file mode 100644
index 0000000..e8fb1b1
--- /dev/null
+++ b/Release/core/core/hooks.c.d
@@ -0,0 +1,2 @@
+core/core/hooks.c.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/hooks.c
diff --git a/Release/core/core/hooks.c.o b/Release/core/core/hooks.c.o
new file mode 100644
index 0000000..6172e28
Binary files /dev/null and b/Release/core/core/hooks.c.o differ
diff --git a/Release/core/core/main.cpp.d b/Release/core/core/main.cpp.d
new file mode 100644
index 0000000..435f6e1
--- /dev/null
+++ b/Release/core/core/main.cpp.d
@@ -0,0 +1,38 @@
+core/core/main.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/main.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
diff --git a/Release/core/core/main.cpp.o b/Release/core/core/main.cpp.o
new file mode 100644
index 0000000..aa1247a
Binary files /dev/null and b/Release/core/core/main.cpp.o differ
diff --git a/Release/core/core/new.cpp.d b/Release/core/core/new.cpp.d
new file mode 100644
index 0000000..21f4034
--- /dev/null
+++ b/Release/core/core/new.cpp.d
@@ -0,0 +1,2 @@
+core/core/new.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/new.cpp
diff --git a/Release/core/core/new.cpp.o b/Release/core/core/new.cpp.o
new file mode 100644
index 0000000..f07810b
Binary files /dev/null and b/Release/core/core/new.cpp.o differ
diff --git a/Release/core/core/subdir.mk b/Release/core/core/subdir.mk
new file mode 100644
index 0000000..c17893f
--- /dev/null
+++ b/Release/core/core/subdir.mk
@@ -0,0 +1,272 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+# Add inputs and outputs from these tool invocations to the build variables 
+CPP_SRCS += \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/CDC.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial0.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial1.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial2.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial3.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/IPAddress.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/PluggableUSB.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Tone.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBCore.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WMath.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/abi.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/main.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/new.cpp 
+
+S_UPPER_SRCS += \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_pulse.S 
+
+C_SRCS += \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WInterrupts.c \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/hooks.c \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring.c \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_analog.c \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_digital.c \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_pulse.c \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_shift.c 
+
+C_DEPS += \
+./core/core/WInterrupts.c.d \
+./core/core/hooks.c.d \
+./core/core/wiring.c.d \
+./core/core/wiring_analog.c.d \
+./core/core/wiring_digital.c.d \
+./core/core/wiring_pulse.c.d \
+./core/core/wiring_shift.c.d 
+
+AR_OBJ += \
+./core/core/CDC.cpp.o \
+./core/core/HardwareSerial.cpp.o \
+./core/core/HardwareSerial0.cpp.o \
+./core/core/HardwareSerial1.cpp.o \
+./core/core/HardwareSerial2.cpp.o \
+./core/core/HardwareSerial3.cpp.o \
+./core/core/IPAddress.cpp.o \
+./core/core/PluggableUSB.cpp.o \
+./core/core/Print.cpp.o \
+./core/core/Stream.cpp.o \
+./core/core/Tone.cpp.o \
+./core/core/USBCore.cpp.o \
+./core/core/WInterrupts.c.o \
+./core/core/WMath.cpp.o \
+./core/core/WString.cpp.o \
+./core/core/abi.cpp.o \
+./core/core/hooks.c.o \
+./core/core/main.cpp.o \
+./core/core/new.cpp.o \
+./core/core/wiring.c.o \
+./core/core/wiring_analog.c.o \
+./core/core/wiring_digital.c.o \
+./core/core/wiring_pulse.S.o \
+./core/core/wiring_pulse.c.o \
+./core/core/wiring_shift.c.o 
+
+S_UPPER_DEPS += \
+./core/core/wiring_pulse.S.d 
+
+CPP_DEPS += \
+./core/core/CDC.cpp.d \
+./core/core/HardwareSerial.cpp.d \
+./core/core/HardwareSerial0.cpp.d \
+./core/core/HardwareSerial1.cpp.d \
+./core/core/HardwareSerial2.cpp.d \
+./core/core/HardwareSerial3.cpp.d \
+./core/core/IPAddress.cpp.d \
+./core/core/PluggableUSB.cpp.d \
+./core/core/Print.cpp.d \
+./core/core/Stream.cpp.d \
+./core/core/Tone.cpp.d \
+./core/core/USBCore.cpp.d \
+./core/core/WMath.cpp.d \
+./core/core/WString.cpp.d \
+./core/core/abi.cpp.d \
+./core/core/main.cpp.d \
+./core/core/new.cpp.d 
+
+
+# Each subdirectory must supply rules for building sources it contributes
+core/core/CDC.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/CDC.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/HardwareSerial.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/HardwareSerial0.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial0.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/HardwareSerial1.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial1.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/HardwareSerial2.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial2.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/HardwareSerial3.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial3.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/IPAddress.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/IPAddress.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/PluggableUSB.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/PluggableUSB.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/Print.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/Stream.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/Tone.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Tone.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/USBCore.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBCore.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/WInterrupts.c.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WInterrupts.c
+	@echo 'Building file: $<'
+	@echo 'Starting C compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/WMath.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WMath.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/WString.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/abi.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/abi.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/hooks.c.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/hooks.c
+	@echo 'Building file: $<'
+	@echo 'Starting C compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/main.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/main.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/new.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/new.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/wiring.c.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring.c
+	@echo 'Building file: $<'
+	@echo 'Starting C compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/wiring_analog.c.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_analog.c
+	@echo 'Building file: $<'
+	@echo 'Starting C compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/wiring_digital.c.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_digital.c
+	@echo 'Building file: $<'
+	@echo 'Starting C compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/wiring_pulse.S.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_pulse.S
+	@echo 'Building file: $<'
+	@echo 'Starting S compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-gcc" -c -g -x assembler-with-cpp -flto -MMD -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)"  "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/wiring_pulse.c.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_pulse.c
+	@echo 'Building file: $<'
+	@echo 'Starting C compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+core/core/wiring_shift.c.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_shift.c
+	@echo 'Building file: $<'
+	@echo 'Starting C compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+
diff --git a/Release/core/core/wiring.c.d b/Release/core/core/wiring.c.d
new file mode 100644
index 0000000..00083a9
--- /dev/null
+++ b/Release/core/core/wiring.c.d
@@ -0,0 +1,17 @@
+core/core/wiring.c.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring.c \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
diff --git a/Release/core/core/wiring.c.o b/Release/core/core/wiring.c.o
new file mode 100644
index 0000000..830458c
Binary files /dev/null and b/Release/core/core/wiring.c.o differ
diff --git a/Release/core/core/wiring_analog.c.d b/Release/core/core/wiring_analog.c.d
new file mode 100644
index 0000000..c08cb3e
--- /dev/null
+++ b/Release/core/core/wiring_analog.c.d
@@ -0,0 +1,17 @@
+core/core/wiring_analog.c.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_analog.c \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
diff --git a/Release/core/core/wiring_analog.c.o b/Release/core/core/wiring_analog.c.o
new file mode 100644
index 0000000..cece45b
Binary files /dev/null and b/Release/core/core/wiring_analog.c.o differ
diff --git a/Release/core/core/wiring_digital.c.d b/Release/core/core/wiring_digital.c.d
new file mode 100644
index 0000000..6f958e9
--- /dev/null
+++ b/Release/core/core/wiring_digital.c.d
@@ -0,0 +1,17 @@
+core/core/wiring_digital.c.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_digital.c \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
diff --git a/Release/core/core/wiring_digital.c.o b/Release/core/core/wiring_digital.c.o
new file mode 100644
index 0000000..26de599
Binary files /dev/null and b/Release/core/core/wiring_digital.c.o differ
diff --git a/Release/core/core/wiring_pulse.S.d b/Release/core/core/wiring_pulse.S.d
new file mode 100644
index 0000000..4c8414e
--- /dev/null
+++ b/Release/core/core/wiring_pulse.S.d
@@ -0,0 +1,2 @@
+core/core/wiring_pulse.S.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_pulse.S
diff --git a/Release/core/core/wiring_pulse.S.o b/Release/core/core/wiring_pulse.S.o
new file mode 100644
index 0000000..fcea6b2
Binary files /dev/null and b/Release/core/core/wiring_pulse.S.o differ
diff --git a/Release/core/core/wiring_pulse.c.d b/Release/core/core/wiring_pulse.c.d
new file mode 100644
index 0000000..0fb52f5
--- /dev/null
+++ b/Release/core/core/wiring_pulse.c.d
@@ -0,0 +1,17 @@
+core/core/wiring_pulse.c.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_pulse.c \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
diff --git a/Release/core/core/wiring_pulse.c.o b/Release/core/core/wiring_pulse.c.o
new file mode 100644
index 0000000..c6a359e
Binary files /dev/null and b/Release/core/core/wiring_pulse.c.o differ
diff --git a/Release/core/core/wiring_shift.c.d b/Release/core/core/wiring_shift.c.d
new file mode 100644
index 0000000..1471ee3
--- /dev/null
+++ b/Release/core/core/wiring_shift.c.d
@@ -0,0 +1,17 @@
+core/core/wiring_shift.c.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_shift.c \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
diff --git a/Release/core/core/wiring_shift.c.o b/Release/core/core/wiring_shift.c.o
new file mode 100644
index 0000000..77fc663
Binary files /dev/null and b/Release/core/core/wiring_shift.c.o differ
diff --git a/Release/libraries/FastLED/FastLED.cpp.d b/Release/libraries/FastLED/FastLED.cpp.d
new file mode 100644
index 0000000..dab5fb2
--- /dev/null
+++ b/Release/libraries/FastLED/FastLED.cpp.d
@@ -0,0 +1,149 @@
+libraries/FastLED/FastLED.cpp.o: \
+ /home/hendrik/Arduino/libraries/FastLED/FastLED.cpp \
+ /home/hendrik/Arduino/libraries/FastLED/FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/cpp_compat.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_config.h \
+ /home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_delay.h \
+ /home/hendrik/Arduino/libraries/FastLED/bitswap.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixeltypes.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h \
+ /home/hendrik/Arduino/libraries/FastLED/color.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastpin.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_types.h \
+ /home/hendrik/Arduino/libraries/FastLED/./dmx.h \
+ /home/hendrik/Arduino/libraries/FastLED/./FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h \
+ /home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorutils.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixelset.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorpalettes.h \
+ /home/hendrik/Arduino/libraries/FastLED/noise.h \
+ /home/hendrik/Arduino/libraries/FastLED/power_mgt.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h \
+ /home/hendrik/Arduino/libraries/FastLED/chipsets.h
+
+/home/hendrik/Arduino/libraries/FastLED/FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/cpp_compat.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_config.h:
+
+/home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_delay.h:
+
+/home/hendrik/Arduino/libraries/FastLED/bitswap.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixeltypes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/color.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastpin.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_types.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./dmx.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h:
+
+/home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorutils.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixelset.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorpalettes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/noise.h:
+
+/home/hendrik/Arduino/libraries/FastLED/power_mgt.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h:
+
+/home/hendrik/Arduino/libraries/FastLED/chipsets.h:
diff --git a/Release/libraries/FastLED/FastLED.cpp.o b/Release/libraries/FastLED/FastLED.cpp.o
new file mode 100644
index 0000000..dccef1b
Binary files /dev/null and b/Release/libraries/FastLED/FastLED.cpp.o differ
diff --git a/Release/libraries/FastLED/bitswap.cpp.d b/Release/libraries/FastLED/bitswap.cpp.d
new file mode 100644
index 0000000..172ff5e
--- /dev/null
+++ b/Release/libraries/FastLED/bitswap.cpp.d
@@ -0,0 +1,149 @@
+libraries/FastLED/bitswap.cpp.o: \
+ /home/hendrik/Arduino/libraries/FastLED/bitswap.cpp \
+ /home/hendrik/Arduino/libraries/FastLED/FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/cpp_compat.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_config.h \
+ /home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_delay.h \
+ /home/hendrik/Arduino/libraries/FastLED/bitswap.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixeltypes.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h \
+ /home/hendrik/Arduino/libraries/FastLED/color.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastpin.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_types.h \
+ /home/hendrik/Arduino/libraries/FastLED/./dmx.h \
+ /home/hendrik/Arduino/libraries/FastLED/./FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h \
+ /home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorutils.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixelset.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorpalettes.h \
+ /home/hendrik/Arduino/libraries/FastLED/noise.h \
+ /home/hendrik/Arduino/libraries/FastLED/power_mgt.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h \
+ /home/hendrik/Arduino/libraries/FastLED/chipsets.h
+
+/home/hendrik/Arduino/libraries/FastLED/FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/cpp_compat.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_config.h:
+
+/home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_delay.h:
+
+/home/hendrik/Arduino/libraries/FastLED/bitswap.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixeltypes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/color.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastpin.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_types.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./dmx.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h:
+
+/home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorutils.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixelset.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorpalettes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/noise.h:
+
+/home/hendrik/Arduino/libraries/FastLED/power_mgt.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h:
+
+/home/hendrik/Arduino/libraries/FastLED/chipsets.h:
diff --git a/Release/libraries/FastLED/bitswap.cpp.o b/Release/libraries/FastLED/bitswap.cpp.o
new file mode 100644
index 0000000..5e1d877
Binary files /dev/null and b/Release/libraries/FastLED/bitswap.cpp.o differ
diff --git a/Release/libraries/FastLED/colorpalettes.cpp.d b/Release/libraries/FastLED/colorpalettes.cpp.d
new file mode 100644
index 0000000..45bfe4c
--- /dev/null
+++ b/Release/libraries/FastLED/colorpalettes.cpp.d
@@ -0,0 +1,149 @@
+libraries/FastLED/colorpalettes.cpp.o: \
+ /home/hendrik/Arduino/libraries/FastLED/colorpalettes.cpp \
+ /home/hendrik/Arduino/libraries/FastLED/FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/cpp_compat.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_config.h \
+ /home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_delay.h \
+ /home/hendrik/Arduino/libraries/FastLED/bitswap.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixeltypes.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h \
+ /home/hendrik/Arduino/libraries/FastLED/color.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastpin.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_types.h \
+ /home/hendrik/Arduino/libraries/FastLED/./dmx.h \
+ /home/hendrik/Arduino/libraries/FastLED/./FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h \
+ /home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorutils.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixelset.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorpalettes.h \
+ /home/hendrik/Arduino/libraries/FastLED/noise.h \
+ /home/hendrik/Arduino/libraries/FastLED/power_mgt.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h \
+ /home/hendrik/Arduino/libraries/FastLED/chipsets.h
+
+/home/hendrik/Arduino/libraries/FastLED/FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/cpp_compat.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_config.h:
+
+/home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_delay.h:
+
+/home/hendrik/Arduino/libraries/FastLED/bitswap.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixeltypes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/color.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastpin.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_types.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./dmx.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h:
+
+/home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorutils.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixelset.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorpalettes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/noise.h:
+
+/home/hendrik/Arduino/libraries/FastLED/power_mgt.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h:
+
+/home/hendrik/Arduino/libraries/FastLED/chipsets.h:
diff --git a/Release/libraries/FastLED/colorpalettes.cpp.o b/Release/libraries/FastLED/colorpalettes.cpp.o
new file mode 100644
index 0000000..89df5ef
Binary files /dev/null and b/Release/libraries/FastLED/colorpalettes.cpp.o differ
diff --git a/Release/libraries/FastLED/colorutils.cpp.d b/Release/libraries/FastLED/colorutils.cpp.d
new file mode 100644
index 0000000..6f5582e
--- /dev/null
+++ b/Release/libraries/FastLED/colorutils.cpp.d
@@ -0,0 +1,149 @@
+libraries/FastLED/colorutils.cpp.o: \
+ /home/hendrik/Arduino/libraries/FastLED/colorutils.cpp \
+ /home/hendrik/Arduino/libraries/FastLED/FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/cpp_compat.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_config.h \
+ /home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_delay.h \
+ /home/hendrik/Arduino/libraries/FastLED/bitswap.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixeltypes.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h \
+ /home/hendrik/Arduino/libraries/FastLED/color.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastpin.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_types.h \
+ /home/hendrik/Arduino/libraries/FastLED/./dmx.h \
+ /home/hendrik/Arduino/libraries/FastLED/./FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h \
+ /home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorutils.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixelset.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorpalettes.h \
+ /home/hendrik/Arduino/libraries/FastLED/noise.h \
+ /home/hendrik/Arduino/libraries/FastLED/power_mgt.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h \
+ /home/hendrik/Arduino/libraries/FastLED/chipsets.h
+
+/home/hendrik/Arduino/libraries/FastLED/FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/cpp_compat.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_config.h:
+
+/home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_delay.h:
+
+/home/hendrik/Arduino/libraries/FastLED/bitswap.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixeltypes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/color.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastpin.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_types.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./dmx.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h:
+
+/home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorutils.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixelset.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorpalettes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/noise.h:
+
+/home/hendrik/Arduino/libraries/FastLED/power_mgt.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h:
+
+/home/hendrik/Arduino/libraries/FastLED/chipsets.h:
diff --git a/Release/libraries/FastLED/colorutils.cpp.o b/Release/libraries/FastLED/colorutils.cpp.o
new file mode 100644
index 0000000..1ec9c75
Binary files /dev/null and b/Release/libraries/FastLED/colorutils.cpp.o differ
diff --git a/Release/libraries/FastLED/hsv2rgb.cpp.d b/Release/libraries/FastLED/hsv2rgb.cpp.d
new file mode 100644
index 0000000..f876737
--- /dev/null
+++ b/Release/libraries/FastLED/hsv2rgb.cpp.d
@@ -0,0 +1,149 @@
+libraries/FastLED/hsv2rgb.cpp.o: \
+ /home/hendrik/Arduino/libraries/FastLED/hsv2rgb.cpp \
+ /home/hendrik/Arduino/libraries/FastLED/FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/cpp_compat.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_config.h \
+ /home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_delay.h \
+ /home/hendrik/Arduino/libraries/FastLED/bitswap.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixeltypes.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h \
+ /home/hendrik/Arduino/libraries/FastLED/color.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastpin.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_types.h \
+ /home/hendrik/Arduino/libraries/FastLED/./dmx.h \
+ /home/hendrik/Arduino/libraries/FastLED/./FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h \
+ /home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorutils.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixelset.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorpalettes.h \
+ /home/hendrik/Arduino/libraries/FastLED/noise.h \
+ /home/hendrik/Arduino/libraries/FastLED/power_mgt.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h \
+ /home/hendrik/Arduino/libraries/FastLED/chipsets.h
+
+/home/hendrik/Arduino/libraries/FastLED/FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/cpp_compat.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_config.h:
+
+/home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_delay.h:
+
+/home/hendrik/Arduino/libraries/FastLED/bitswap.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixeltypes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/color.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastpin.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_types.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./dmx.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h:
+
+/home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorutils.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixelset.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorpalettes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/noise.h:
+
+/home/hendrik/Arduino/libraries/FastLED/power_mgt.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h:
+
+/home/hendrik/Arduino/libraries/FastLED/chipsets.h:
diff --git a/Release/libraries/FastLED/hsv2rgb.cpp.o b/Release/libraries/FastLED/hsv2rgb.cpp.o
new file mode 100644
index 0000000..f6fb7be
Binary files /dev/null and b/Release/libraries/FastLED/hsv2rgb.cpp.o differ
diff --git a/Release/libraries/FastLED/lib8tion.cpp.d b/Release/libraries/FastLED/lib8tion.cpp.d
new file mode 100644
index 0000000..211d0be
--- /dev/null
+++ b/Release/libraries/FastLED/lib8tion.cpp.d
@@ -0,0 +1,149 @@
+libraries/FastLED/lib8tion.cpp.o: \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.cpp \
+ /home/hendrik/Arduino/libraries/FastLED/FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/cpp_compat.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_config.h \
+ /home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_delay.h \
+ /home/hendrik/Arduino/libraries/FastLED/bitswap.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixeltypes.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h \
+ /home/hendrik/Arduino/libraries/FastLED/color.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastpin.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_types.h \
+ /home/hendrik/Arduino/libraries/FastLED/./dmx.h \
+ /home/hendrik/Arduino/libraries/FastLED/./FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h \
+ /home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorutils.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixelset.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorpalettes.h \
+ /home/hendrik/Arduino/libraries/FastLED/noise.h \
+ /home/hendrik/Arduino/libraries/FastLED/power_mgt.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h \
+ /home/hendrik/Arduino/libraries/FastLED/chipsets.h
+
+/home/hendrik/Arduino/libraries/FastLED/FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/cpp_compat.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_config.h:
+
+/home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_delay.h:
+
+/home/hendrik/Arduino/libraries/FastLED/bitswap.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixeltypes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/color.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastpin.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_types.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./dmx.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h:
+
+/home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorutils.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixelset.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorpalettes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/noise.h:
+
+/home/hendrik/Arduino/libraries/FastLED/power_mgt.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h:
+
+/home/hendrik/Arduino/libraries/FastLED/chipsets.h:
diff --git a/Release/libraries/FastLED/lib8tion.cpp.o b/Release/libraries/FastLED/lib8tion.cpp.o
new file mode 100644
index 0000000..b748ddd
Binary files /dev/null and b/Release/libraries/FastLED/lib8tion.cpp.o differ
diff --git a/Release/libraries/FastLED/noise.cpp.d b/Release/libraries/FastLED/noise.cpp.d
new file mode 100644
index 0000000..0f9f6e6
--- /dev/null
+++ b/Release/libraries/FastLED/noise.cpp.d
@@ -0,0 +1,149 @@
+libraries/FastLED/noise.cpp.o: \
+ /home/hendrik/Arduino/libraries/FastLED/noise.cpp \
+ /home/hendrik/Arduino/libraries/FastLED/FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/cpp_compat.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_config.h \
+ /home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_delay.h \
+ /home/hendrik/Arduino/libraries/FastLED/bitswap.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixeltypes.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h \
+ /home/hendrik/Arduino/libraries/FastLED/color.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastpin.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_types.h \
+ /home/hendrik/Arduino/libraries/FastLED/./dmx.h \
+ /home/hendrik/Arduino/libraries/FastLED/./FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h \
+ /home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorutils.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixelset.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorpalettes.h \
+ /home/hendrik/Arduino/libraries/FastLED/noise.h \
+ /home/hendrik/Arduino/libraries/FastLED/power_mgt.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h \
+ /home/hendrik/Arduino/libraries/FastLED/chipsets.h
+
+/home/hendrik/Arduino/libraries/FastLED/FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/cpp_compat.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_config.h:
+
+/home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_delay.h:
+
+/home/hendrik/Arduino/libraries/FastLED/bitswap.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixeltypes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/color.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastpin.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_types.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./dmx.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h:
+
+/home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorutils.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixelset.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorpalettes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/noise.h:
+
+/home/hendrik/Arduino/libraries/FastLED/power_mgt.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h:
+
+/home/hendrik/Arduino/libraries/FastLED/chipsets.h:
diff --git a/Release/libraries/FastLED/noise.cpp.o b/Release/libraries/FastLED/noise.cpp.o
new file mode 100644
index 0000000..eab6744
Binary files /dev/null and b/Release/libraries/FastLED/noise.cpp.o differ
diff --git a/Release/libraries/FastLED/power_mgt.cpp.d b/Release/libraries/FastLED/power_mgt.cpp.d
new file mode 100644
index 0000000..6f0640c
--- /dev/null
+++ b/Release/libraries/FastLED/power_mgt.cpp.d
@@ -0,0 +1,149 @@
+libraries/FastLED/power_mgt.cpp.o: \
+ /home/hendrik/Arduino/libraries/FastLED/power_mgt.cpp \
+ /home/hendrik/Arduino/libraries/FastLED/FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/cpp_compat.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_config.h \
+ /home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_delay.h \
+ /home/hendrik/Arduino/libraries/FastLED/bitswap.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixeltypes.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h \
+ /home/hendrik/Arduino/libraries/FastLED/color.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastpin.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_types.h \
+ /home/hendrik/Arduino/libraries/FastLED/./dmx.h \
+ /home/hendrik/Arduino/libraries/FastLED/./FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h \
+ /home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorutils.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixelset.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorpalettes.h \
+ /home/hendrik/Arduino/libraries/FastLED/noise.h \
+ /home/hendrik/Arduino/libraries/FastLED/power_mgt.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h \
+ /home/hendrik/Arduino/libraries/FastLED/chipsets.h
+
+/home/hendrik/Arduino/libraries/FastLED/FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/cpp_compat.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_config.h:
+
+/home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_delay.h:
+
+/home/hendrik/Arduino/libraries/FastLED/bitswap.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixeltypes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/color.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastpin.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_types.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./dmx.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h:
+
+/home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorutils.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixelset.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorpalettes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/noise.h:
+
+/home/hendrik/Arduino/libraries/FastLED/power_mgt.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h:
+
+/home/hendrik/Arduino/libraries/FastLED/chipsets.h:
diff --git a/Release/libraries/FastLED/power_mgt.cpp.o b/Release/libraries/FastLED/power_mgt.cpp.o
new file mode 100644
index 0000000..b0f559d
Binary files /dev/null and b/Release/libraries/FastLED/power_mgt.cpp.o differ
diff --git a/Release/libraries/FastLED/subdir.mk b/Release/libraries/FastLED/subdir.mk
new file mode 100644
index 0000000..75c39c2
--- /dev/null
+++ b/Release/libraries/FastLED/subdir.mk
@@ -0,0 +1,104 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+# Add inputs and outputs from these tool invocations to the build variables 
+CPP_SRCS += \
+/home/hendrik/Arduino/libraries/FastLED/FastLED.cpp \
+/home/hendrik/Arduino/libraries/FastLED/bitswap.cpp \
+/home/hendrik/Arduino/libraries/FastLED/colorpalettes.cpp \
+/home/hendrik/Arduino/libraries/FastLED/colorutils.cpp \
+/home/hendrik/Arduino/libraries/FastLED/hsv2rgb.cpp \
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.cpp \
+/home/hendrik/Arduino/libraries/FastLED/noise.cpp \
+/home/hendrik/Arduino/libraries/FastLED/power_mgt.cpp \
+/home/hendrik/Arduino/libraries/FastLED/wiring.cpp 
+
+LINK_OBJ += \
+./libraries/FastLED/FastLED.cpp.o \
+./libraries/FastLED/bitswap.cpp.o \
+./libraries/FastLED/colorpalettes.cpp.o \
+./libraries/FastLED/colorutils.cpp.o \
+./libraries/FastLED/hsv2rgb.cpp.o \
+./libraries/FastLED/lib8tion.cpp.o \
+./libraries/FastLED/noise.cpp.o \
+./libraries/FastLED/power_mgt.cpp.o \
+./libraries/FastLED/wiring.cpp.o 
+
+CPP_DEPS += \
+./libraries/FastLED/FastLED.cpp.d \
+./libraries/FastLED/bitswap.cpp.d \
+./libraries/FastLED/colorpalettes.cpp.d \
+./libraries/FastLED/colorutils.cpp.d \
+./libraries/FastLED/hsv2rgb.cpp.d \
+./libraries/FastLED/lib8tion.cpp.d \
+./libraries/FastLED/noise.cpp.d \
+./libraries/FastLED/power_mgt.cpp.d \
+./libraries/FastLED/wiring.cpp.d 
+
+
+# Each subdirectory must supply rules for building sources it contributes
+libraries/FastLED/FastLED.cpp.o: /home/hendrik/Arduino/libraries/FastLED/FastLED.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+libraries/FastLED/bitswap.cpp.o: /home/hendrik/Arduino/libraries/FastLED/bitswap.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+libraries/FastLED/colorpalettes.cpp.o: /home/hendrik/Arduino/libraries/FastLED/colorpalettes.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+libraries/FastLED/colorutils.cpp.o: /home/hendrik/Arduino/libraries/FastLED/colorutils.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+libraries/FastLED/hsv2rgb.cpp.o: /home/hendrik/Arduino/libraries/FastLED/hsv2rgb.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+libraries/FastLED/lib8tion.cpp.o: /home/hendrik/Arduino/libraries/FastLED/lib8tion.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+libraries/FastLED/noise.cpp.o: /home/hendrik/Arduino/libraries/FastLED/noise.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+libraries/FastLED/power_mgt.cpp.o: /home/hendrik/Arduino/libraries/FastLED/power_mgt.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+libraries/FastLED/wiring.cpp.o: /home/hendrik/Arduino/libraries/FastLED/wiring.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+
diff --git a/Release/libraries/FastLED/wiring.cpp.d b/Release/libraries/FastLED/wiring.cpp.d
new file mode 100644
index 0000000..4f2a982
--- /dev/null
+++ b/Release/libraries/FastLED/wiring.cpp.d
@@ -0,0 +1,149 @@
+libraries/FastLED/wiring.cpp.o: \
+ /home/hendrik/Arduino/libraries/FastLED/wiring.cpp \
+ /home/hendrik/Arduino/libraries/FastLED/FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/cpp_compat.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_config.h \
+ /home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_delay.h \
+ /home/hendrik/Arduino/libraries/FastLED/bitswap.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixeltypes.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h \
+ /home/hendrik/Arduino/libraries/FastLED/color.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastpin.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_types.h \
+ /home/hendrik/Arduino/libraries/FastLED/./dmx.h \
+ /home/hendrik/Arduino/libraries/FastLED/./FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h \
+ /home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorutils.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixelset.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorpalettes.h \
+ /home/hendrik/Arduino/libraries/FastLED/noise.h \
+ /home/hendrik/Arduino/libraries/FastLED/power_mgt.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h \
+ /home/hendrik/Arduino/libraries/FastLED/chipsets.h
+
+/home/hendrik/Arduino/libraries/FastLED/FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/cpp_compat.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_config.h:
+
+/home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_delay.h:
+
+/home/hendrik/Arduino/libraries/FastLED/bitswap.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixeltypes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/color.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastpin.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_types.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./dmx.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h:
+
+/home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorutils.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixelset.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorpalettes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/noise.h:
+
+/home/hendrik/Arduino/libraries/FastLED/power_mgt.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h:
+
+/home/hendrik/Arduino/libraries/FastLED/chipsets.h:
diff --git a/Release/libraries/FastLED/wiring.cpp.o b/Release/libraries/FastLED/wiring.cpp.o
new file mode 100644
index 0000000..b9a07cc
Binary files /dev/null and b/Release/libraries/FastLED/wiring.cpp.o differ
diff --git a/Release/libraries/SPI/src/SPI.cpp.d b/Release/libraries/SPI/src/SPI.cpp.d
new file mode 100644
index 0000000..a38e6b5
--- /dev/null
+++ b/Release/libraries/SPI/src/SPI.cpp.d
@@ -0,0 +1,41 @@
+libraries/SPI/src/SPI.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
diff --git a/Release/libraries/SPI/src/SPI.cpp.o b/Release/libraries/SPI/src/SPI.cpp.o
new file mode 100644
index 0000000..6961e51
Binary files /dev/null and b/Release/libraries/SPI/src/SPI.cpp.o differ
diff --git a/Release/libraries/SPI/src/subdir.mk b/Release/libraries/SPI/src/subdir.mk
new file mode 100644
index 0000000..7409cb6
--- /dev/null
+++ b/Release/libraries/SPI/src/subdir.mk
@@ -0,0 +1,24 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+# Add inputs and outputs from these tool invocations to the build variables 
+CPP_SRCS += \
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.cpp 
+
+LINK_OBJ += \
+./libraries/SPI/src/SPI.cpp.o 
+
+CPP_DEPS += \
+./libraries/SPI/src/SPI.cpp.d 
+
+
+# Each subdirectory must supply rules for building sources it contributes
+libraries/SPI/src/SPI.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+
diff --git a/Release/libraries/TFT/src/TFT.cpp.d b/Release/libraries/TFT/src/TFT.cpp.d
new file mode 100644
index 0000000..4fdc9c8
--- /dev/null
+++ b/Release/libraries/TFT/src/TFT.cpp.d
@@ -0,0 +1,53 @@
+libraries/TFT/src/TFT.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/TFT.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/TFT.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_GFX.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_ST7735.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/TFT.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_GFX.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_ST7735.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.h:
diff --git a/Release/libraries/TFT/src/TFT.cpp.o b/Release/libraries/TFT/src/TFT.cpp.o
new file mode 100644
index 0000000..1571222
Binary files /dev/null and b/Release/libraries/TFT/src/TFT.cpp.o differ
diff --git a/Release/libraries/TFT/src/subdir.mk b/Release/libraries/TFT/src/subdir.mk
new file mode 100644
index 0000000..58c5b33
--- /dev/null
+++ b/Release/libraries/TFT/src/subdir.mk
@@ -0,0 +1,24 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+# Add inputs and outputs from these tool invocations to the build variables 
+CPP_SRCS += \
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/TFT.cpp 
+
+LINK_OBJ += \
+./libraries/TFT/src/TFT.cpp.o 
+
+CPP_DEPS += \
+./libraries/TFT/src/TFT.cpp.d 
+
+
+# Each subdirectory must supply rules for building sources it contributes
+libraries/TFT/src/TFT.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/TFT.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+
diff --git a/Release/libraries/TFT/src/utility/Adafruit_GFX.cpp.d b/Release/libraries/TFT/src/utility/Adafruit_GFX.cpp.d
new file mode 100644
index 0000000..c1150d8
--- /dev/null
+++ b/Release/libraries/TFT/src/utility/Adafruit_GFX.cpp.d
@@ -0,0 +1,47 @@
+libraries/TFT/src/utility/Adafruit_GFX.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_GFX.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_GFX.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/glcdfont.c
+
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_GFX.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/glcdfont.c:
diff --git a/Release/libraries/TFT/src/utility/Adafruit_GFX.cpp.o b/Release/libraries/TFT/src/utility/Adafruit_GFX.cpp.o
new file mode 100644
index 0000000..a86396f
Binary files /dev/null and b/Release/libraries/TFT/src/utility/Adafruit_GFX.cpp.o differ
diff --git a/Release/libraries/TFT/src/utility/Adafruit_ST7735.cpp.d b/Release/libraries/TFT/src/utility/Adafruit_ST7735.cpp.d
new file mode 100644
index 0000000..7213ed6
--- /dev/null
+++ b/Release/libraries/TFT/src/utility/Adafruit_ST7735.cpp.d
@@ -0,0 +1,53 @@
+libraries/TFT/src/utility/Adafruit_ST7735.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_ST7735.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_ST7735.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_GFX.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_ST7735.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_GFX.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/wiring_private.h:
diff --git a/Release/libraries/TFT/src/utility/Adafruit_ST7735.cpp.o b/Release/libraries/TFT/src/utility/Adafruit_ST7735.cpp.o
new file mode 100644
index 0000000..a154227
Binary files /dev/null and b/Release/libraries/TFT/src/utility/Adafruit_ST7735.cpp.o differ
diff --git a/Release/libraries/TFT/src/utility/glcdfont.c.d b/Release/libraries/TFT/src/utility/glcdfont.c.d
new file mode 100644
index 0000000..d53c2b1
--- /dev/null
+++ b/Release/libraries/TFT/src/utility/glcdfont.c.d
@@ -0,0 +1,2 @@
+libraries/TFT/src/utility/glcdfont.c.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/glcdfont.c
diff --git a/Release/libraries/TFT/src/utility/glcdfont.c.o b/Release/libraries/TFT/src/utility/glcdfont.c.o
new file mode 100644
index 0000000..d8cdcdb
Binary files /dev/null and b/Release/libraries/TFT/src/utility/glcdfont.c.o differ
diff --git a/Release/libraries/TFT/src/utility/subdir.mk b/Release/libraries/TFT/src/utility/subdir.mk
new file mode 100644
index 0000000..bdb5ce5
--- /dev/null
+++ b/Release/libraries/TFT/src/utility/subdir.mk
@@ -0,0 +1,48 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+# Add inputs and outputs from these tool invocations to the build variables 
+CPP_SRCS += \
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_GFX.cpp \
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_ST7735.cpp 
+
+C_SRCS += \
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/glcdfont.c 
+
+C_DEPS += \
+./libraries/TFT/src/utility/glcdfont.c.d 
+
+LINK_OBJ += \
+./libraries/TFT/src/utility/Adafruit_GFX.cpp.o \
+./libraries/TFT/src/utility/Adafruit_ST7735.cpp.o \
+./libraries/TFT/src/utility/glcdfont.c.o 
+
+CPP_DEPS += \
+./libraries/TFT/src/utility/Adafruit_GFX.cpp.d \
+./libraries/TFT/src/utility/Adafruit_ST7735.cpp.d 
+
+
+# Each subdirectory must supply rules for building sources it contributes
+libraries/TFT/src/utility/Adafruit_GFX.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_GFX.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+libraries/TFT/src/utility/Adafruit_ST7735.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_ST7735.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+libraries/TFT/src/utility/glcdfont.c.o: /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/glcdfont.c
+	@echo 'Building file: $<'
+	@echo 'Starting C compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+
diff --git a/Release/libraries/TimerOne/TimerOne.cpp.d b/Release/libraries/TimerOne/TimerOne.cpp.d
new file mode 100644
index 0000000..d7d4037
--- /dev/null
+++ b/Release/libraries/TimerOne/TimerOne.cpp.d
@@ -0,0 +1,44 @@
+libraries/TimerOne/TimerOne.cpp.o: \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0/TimerOne.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0/TimerOne.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0/config/known_16bit_timers.h
+
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0/TimerOne.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0/config/known_16bit_timers.h:
diff --git a/Release/libraries/TimerOne/TimerOne.cpp.o b/Release/libraries/TimerOne/TimerOne.cpp.o
new file mode 100644
index 0000000..1e74358
Binary files /dev/null and b/Release/libraries/TimerOne/TimerOne.cpp.o differ
diff --git a/Release/libraries/TimerOne/subdir.mk b/Release/libraries/TimerOne/subdir.mk
new file mode 100644
index 0000000..9f4a636
--- /dev/null
+++ b/Release/libraries/TimerOne/subdir.mk
@@ -0,0 +1,24 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+# Add inputs and outputs from these tool invocations to the build variables 
+CPP_SRCS += \
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0/TimerOne.cpp 
+
+LINK_OBJ += \
+./libraries/TimerOne/TimerOne.cpp.o 
+
+CPP_DEPS += \
+./libraries/TimerOne/TimerOne.cpp.d 
+
+
+# Each subdirectory must supply rules for building sources it contributes
+libraries/TimerOne/TimerOne.cpp.o: /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0/TimerOne.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+
diff --git a/Release/makefile b/Release/makefile
new file mode 100644
index 0000000..c32dfdd
--- /dev/null
+++ b/Release/makefile
@@ -0,0 +1,103 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+-include ../makefile.init
+
+RM := rm
+
+# All of the sources participating in the build are defined here
+-include sources.mk
+-include subdir.mk
+-include libraries/TimerOne/subdir.mk
+-include libraries/TFT/src/utility/subdir.mk
+-include libraries/TFT/src/subdir.mk
+-include libraries/SPI/src/subdir.mk
+-include libraries/FastLED/subdir.mk
+-include core/core/subdir.mk
+-include objects.mk
+
+ifneq ($(MAKECMDGOALS),clean)
+ifneq ($(strip $(CC_DEPS)),)
+-include $(CC_DEPS)
+endif
+ifneq ($(strip $(C++_DEPS)),)
+-include $(C++_DEPS)
+endif
+ifneq ($(strip $(C_UPPER_DEPS)),)
+-include $(C_UPPER_DEPS)
+endif
+ifneq ($(strip $(CXX_DEPS)),)
+-include $(CXX_DEPS)
+endif
+ifneq ($(strip $(ASM_DEPS)),)
+-include $(ASM_DEPS)
+endif
+ifneq ($(strip $(INO_DEPS)),)
+-include $(INO_DEPS)
+endif
+ifneq ($(strip $(PDE_DEPS)),)
+-include $(PDE_DEPS)
+endif
+ifneq ($(strip $(S_UPPER_DEPS)),)
+-include $(S_UPPER_DEPS)
+endif
+ifneq ($(strip $(CPP_DEPS)),)
+-include $(CPP_DEPS)
+endif
+ifneq ($(strip $(C_DEPS)),)
+-include $(C_DEPS)
+endif
+endif
+
+-include ../makefile.defs
+
+# Add inputs and outputs from these tool invocations to the build variables 
+AR += \
+/home/hendrik/eclipse-workspace/Arduino/simpleReflowController/Release/arduino.ar \
+
+ELF += \
+simpleReflowController.elf \
+
+HEX += \
+simpleReflowController.hex \
+
+
+# All Target
+all: simpleReflowController
+
+# Tool invocations
+simpleReflowController: $(HEX)
+	@echo 'Building target: $@'
+	@echo 'Printing size:'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-size" -A "/home/hendrik/eclipse-workspace/Arduino/simpleReflowController/Release/simpleReflowController.elf"
+	@echo 'Finished building target: $@'
+	@echo ' '
+
+/home/hendrik/eclipse-workspace/Arduino/simpleReflowController/Release/arduino.ar: $(AR_OBJ)
+	@echo 'Starting archiver'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-gcc-ar" rcs     /home/hendrik/eclipse-workspace/Arduino/simpleReflowController/Release/arduino.ar $(AR_OBJ)
+	@echo 'Finished building: $@'
+	@echo ' '
+
+simpleReflowController.elf: $(LINK_OBJ) $(AR)
+	@echo 'Starting combiner'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-gcc" -Wall -Wextra -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections -mmcu=atmega328p  -o "/home/hendrik/eclipse-workspace/Arduino/simpleReflowController/Release/simpleReflowController.elf"   $(LINK_OBJ)   /home/hendrik/eclipse-workspace/Arduino/simpleReflowController/Release/arduino.ar  "-L/home/hendrik/eclipse-workspace/Arduino/simpleReflowController/Release" -lm
+	@echo 'Finished building: $@'
+	@echo ' '
+
+simpleReflowController.hex: $(ELF)
+	@echo 'Do all objcopy commands'
+	${A.RECIPE.OBJCOPY.EEP.PATTERN}
+	${A.RECIPE.OBJCOPY.HEX.PATTERN}
+	@echo 'Finished building: $@'
+	@echo ' '
+
+# Other Targets
+clean:
+	-$(RM) $(C_UPPER_DEPS)$(PDE_DEPS)$(C_DEPS)$(AR)$(CC_DEPS)$(AR_OBJ)$(C++_DEPS)$(LINK_OBJ)$(CXX_DEPS)$(ASM_DEPS)$(HEX)$(INO_DEPS)$(SIZEDUMMY)$(S_UPPER_DEPS)$(ELF)$(CPP_DEPS)
+	-@echo ' '
+
+.PHONY: all clean dependents
+
+-include ../makefile.targets
diff --git a/Release/objects.mk b/Release/objects.mk
new file mode 100644
index 0000000..742c2da
--- /dev/null
+++ b/Release/objects.mk
@@ -0,0 +1,8 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+USER_OBJS :=
+
+LIBS :=
+
diff --git a/Release/simpleReflowController.eep b/Release/simpleReflowController.eep
new file mode 100644
index 0000000..1996e8f
--- /dev/null
+++ b/Release/simpleReflowController.eep
@@ -0,0 +1 @@
+:00000001FF
diff --git a/Release/simpleReflowController.elf b/Release/simpleReflowController.elf
new file mode 100755
index 0000000..a9a198c
Binary files /dev/null and b/Release/simpleReflowController.elf differ
diff --git a/Release/simpleReflowController.hex b/Release/simpleReflowController.hex
new file mode 100644
index 0000000..2b64440
--- /dev/null
+++ b/Release/simpleReflowController.hex
@@ -0,0 +1,988 @@
+:100000000C940C030C9434030C9434030C943403BC
+:100010000C9434030C9434030C9434030C94340384
+:100020000C9434030C9434030C9434030C94340374
+:100030000C9434030C941D0A0C9434030C94340374
+:100040000C9441130C9434030C94420F0C941C0F29
+:100050000C9434030C9434030C9434030C94340344
+:100060000C9434030C94340300000000003E5B4FFA
+:100070005B3E3E6B4F6B3E1C3E7C3E1C183C7E3C08
+:10008000181C577D571C1C5E7F5E1C00183C180016
+:10009000FFE7C3E7FF0018241800FFE7DBE7FF30A6
+:1000A000483A060E2629792926407F050507407F14
+:1000B00005253F5A3CE73C5A7F3E1C1C08081C1C87
+:1000C0003E7F14227F22145F5F005F5F06097F017D
+:1000D0007F006689956A606060606094A2FFA29468
+:1000E00008047E040810207E201008082A1C080836
+:1000F0001C2A08081E101010100C1E0C1E0C303884
+:100100003E3830060E3E0E06000000000000005F84
+:1001100000000007000700147F147F14242A7F2AA0
+:100120001223130864623649562050000807030062
+:10013000001C2241000041221C002A1C7F1C2A08AE
+:10014000083E080800807030000808080808000011
+:1001500060600020100804023E5149453E00427F85
+:10016000400072494949462141494D331814127FD4
+:100170001027454545393C4A494931412111090774
+:100180003649494936464949291E000014000000F5
+:1001900040340000000814224114141414140041C7
+:1001A00022140802015909063E415D594E7C121184
+:1001B000127C7F494949363E414141227F414141BC
+:1001C0003E7F494949417F090909013E4141517337
+:1001D0007F0808087F00417F41002040413F017FA8
+:1001E000081422417F404040407F021C027F7F0470
+:1001F00008107F3E4141413E7F090909063E4151B9
+:10020000215E7F09192946264949493203017F01A8
+:10021000033F4040403F1F2040201F3F4038403FA9
+:10022000631408146303047804036159494D4300BF
+:100230007F4141410204081020004141417F0402F6
+:10024000010204404040404000030708002054548D
+:1002500078407F284444383844444428384444286B
+:100260007F385454541800087E090218A4A49C78BE
+:100270007F0804047800447D40002040403D007F1A
+:100280001028440000417F40007C047804787C08FA
+:100290000404783844444438FC18242418182424CE
+:1002A00018FC7C08040408485454542404043F44B3
+:1002B000243C4040207C1C2040201C3C4030403CE2
+:1002C00044281028444C9090907C4464544C440042
+:1002D00008364100000077000000413608000201A6
+:1002E0000204023C2623263C1EA1A161123A404092
+:1002F000207A385454555921555579412154547810
+:1003000041215554784020545579400C1E527212A8
+:100310003955555559395454545939555454580030
+:1003200000457C410002457D420001457C40F029AA
+:100330002429F0F0282528F07C54554500205454F9
+:100340007C547C0A097F493249494932324848483D
+:1003500032324A4848303A4141217A3A4240207884
+:10036000009DA0A07D39444444393D4040403D3C7F
+:1003700024FF2424487E4943662B2FFC2F2BFF09A2
+:1003800029F620C0887E0903205454794100004496
+:100390007D413048484A32384040227A007A0A0A81
+:1003A000727D0D19317D2629292F282629292926F4
+:1003B00030484D4020380808080808080808382F39
+:1003C00010C8ACBA2F102834FA00007B00000814C3
+:1003D0002A142222142A1408AA005500AAAA55AAEF
+:1003E00055AA000000FF00101010FF00141414FFA5
+:1003F000001010FF00FF1010F010F0141414FC0097
+:100400001414F700FF0000FF00FF1414F404FC14A0
+:100410001417101F10101F101F1414141F00101099
+:1004200010F0000000001F101010101F101010100E
+:10043000F010000000FF101010101010101010FF2E
+:1004400010000000FF140000FF00FF00001F101745
+:100450000000FC04F414141710171414F404F4002E
+:1004600000FF00F714141414141414F700F71414F4
+:1004700014171410101F101F141414F4141010F07B
+:1004800010F000001F101F0000001F14000000FCEF
+:10049000140000F010F01010FF10FF141414FF14DB
+:1004A0001010101F00000000F010FFFFFFFFFFF012
+:1004B000F0F0F0F0FFFFFF0000000000FFFF0F0F63
+:1004C0000F0F0F38444438447C2A2A3E147E02021F
+:1004D0000606027E027E0263554941633844443C6D
+:1004E00004407E201E2006027E020299A5E7A599FF
+:1004F0001C2A492A1C4C7201724C304A4D4D303036
+:1005000048784830BC625A463D3E494949007E0120
+:1005100001017E2A2A2A2A2A44445F444440514A3F
+:10052000444040444A51400000FF0103E080FF0086
+:100530000008086B6B083612362436060F090F06C2
+:10054000000018180000001010003040FF010100EA
+:100550001F01011E00191D1712003C3C3C3C00000D
+:1005600000000013018032118064260104B1020BE7
+:1005700014C0020800C10105C5024130C701C1EC29
+:10058000011B3A8155642A040000007F2B040000FF
+:10059000009F3601C8B70100F20100E08F28242235
+:1005A000312B0E53A5421618121A140332E18F177D
+:1005B0001B1D0E14112CA53D09272D252B3C321394
+:1005C000800A2980FF00000000240027002A000084
+:1005D000000000250028002B000404040404040487
+:1005E00004020202020202030303030303010204E2
+:1005F00008102040800102040810200102040810A5
+:1006000020000000080002010000030407000000B1
+:100610000000000000003A1811241FBECFEFD8E000
+:10062000DEBFCDBF11E0A0E0B1E0E4EEFCE302C02C
+:1006300005900D92A23BB107D9F725E0A2EBB1E0FE
+:1006400001C01D92A83CB207E1F713E0CCE0D3E073
+:1006500004C02197FE010E945F1CCB30D107C9F76F
+:100660000E948B130C94701E0C9400004C7F38E099
+:10067000439FC001112430E043E0359527954A950A
+:10068000E1F7822B932B687F962B089508952F9284
+:100690003F924F925F926F927F928F929F92AF9212
+:1006A000BF92CF92DF92EF92FF920F931F93CF935F
+:1006B000DF93CDB7DEB72D970FB6F894DEBF0FBE30
+:1006C000CDBF9D838C836A30A1F4DC0154962C91BC
+:1006D00054971E968D919C911F97B8E02B9F800D8B
+:1006E000911D1124EC81FD819787868715861486DC
+:1006F000F1C06D3009F4EEC02C813D813D872C871F
+:10070000D9011C96CD90DC901D9718968D919C91E7
+:100710001997C816D906BCF0EC85FD854489242FAD
+:1007200030E084859585F6E04F9F800D911D112462
+:10073000AC85BD851D969C938E931C9756964C91C7
+:100740004111A4C0C7C0EC85FD858684978482854D
+:1007500093858816990604F7F489F983AF2EB12C96
+:10076000C60126E0F29F800D911D1124181619066E
+:100770009CF6C50123E0880F991F2A95E1F7880DA3
+:10078000991D1816190644F6AC85BD8552960D9034
+:10079000BC91A02DBD83AC83EC85FD850088F189DB
+:1007A000E02DFF83EE83F5E06F9FB0011124160169
+:1007B0001A829B012C193D0939872887C4010896A4
+:1007C0009B878A879A81953049F0E885F985E20D03
+:1007D000F31DE859FF4FA491AB8301C01B82240194
+:1007E0003401BB81B0FF13C0AC85BD85ED91FC9198
+:1007F000B981B13031F40084F185E02D2E813F8143
+:1008000019C00288F389E02DEE80FF801EC0EC81C4
+:10081000FD812E813F81E217F307F1F0AC85BD85A4
+:10082000ED91FC91B981B13059F40084F185E02D4E
+:100830002C813D81A301B1018C859D8509950CC05A
+:100840000288F389E02DEC80FD8085019501A201ED
+:10085000B6018C859D850995EB81E695EB83FFEFCD
+:100860006F1A7F0A4A0C5B1C2A853B8526153705C3
+:1008700009F0B7CF3A813F5F3A835FEF251A350A17
+:10088000CA0CDB1C363009F09DCF46CF4AEF42033D
+:10089000B001439F700D1124AC85BD8518964D9114
+:1008A0005C911997460F571F481759079CF483E02E
+:1008B000220F331F8A95E1F71E968D919C911F9709
+:1008C000280F391F1F963C932E931E971D961C923E
+:1008D0001E921C9781E090E02D960FB6F894DEBF33
+:1008E0000FBECDBFDF91CF911F910F91FF90EF9081
+:1008F000DF90CF90BF90AF909F908F907F906F9040
+:100900005F904F903F902F900895EF92FF920F933A
+:100910001F93DC011A960D911C911B9718962D912F
+:100920003C911997ED91FC910288F389E02D7B01B0
+:1009300040E050E060E070E009951F910F91FF905A
+:10094000EF9008956F927F928F929F92AF92BF9295
+:10095000CF92DF92EF92FF920F931F93CF93DF938B
+:100960006C015A014801EB013B01620E731EC61572
+:10097000D70574F4D601ED91FC910484F585E02D42
+:1009800087019401A501BE01C60109952196EFCF0B
+:10099000DF91CF911F910F91FF90EF90DF90CF905B
+:1009A000BF90AF909F908F907F906F900895EF923F
+:1009B000FF920F931F93260F371F21503109DC013F
+:1009C000ED91FC910284F385E02D78018A0109956F
+:1009D0001F910F91FF90EF900895EF92FF920F9368
+:1009E0001F93240F351F21503109DC01ED91FC913B
+:1009F0000284F385E02D780189019B0109951F91FF
+:100A00000F91FF90EF9008956F927F928F929F9237
+:100A1000AF92BF92CF92DF92EF92FF920F931F930C
+:100A2000CF93DF93EC014B015A0169013801E88152
+:100A3000F9810684F785E02D87010995A501460D0A
+:100A4000571D41505109E881F9810684F785E02D51
+:100A50009601B401CE010995E881F9810484F585F8
+:100A6000E02D9301A501B401CE010995C80CD91C54
+:100A7000B60161507109E881F9810484F585E02DA2
+:100A80009301A501CE010995DF91CF911F910F919F
+:100A9000FF90EF90DF90CF90BF90AF909F908F909E
+:100AA0007F906F9008952F923F924F925F926F9236
+:100AB0007F928F929F92AF92BF92CF92DF92EF92EE
+:100AC000FF920F931F93CF93DF9300D000D000D0FD
+:100AD000CDB7DEB72C017E836D836A015901C80151
+:100AE000FC82EB824801841A950A97FE03C0919418
+:100AF0008194910835012D813E81621A730A77FE37
+:100B000003C0719461947108681479045CF43A2DFF
+:100B10002B2D5C01832F922F3D812E81DE82CD8291
+:100B2000C32ED22EAD81BE81AA16BB065CF43C2D2D
+:100B30002D2D6C01832F922F3D812E81BE82AD829F
+:100B4000A32EB22E85012D813E81021B130B1C01A9
+:100B50002C183D0837FE03C03194219431087801E8
+:100B600017FF03C03FEFE31AF30AF594E794C816A2
+:100B7000D9062CF08FEF9FEF9A83898304C0A1E000
+:100B8000B0E0BA83A9832D813E81A216B30624F179
+:100B9000D201ED91FC910084F185E02D2B813C8107
+:100BA0006814790424F44D815E81B60103C0A60166
+:100BB0006D817E81C2010995E218F308F7FE06C037
+:100BC00029813A81C20ED31EE00EF11E8D819E81D5
+:100BD00001969E838D83D7CF26960FB6F894DEBFFD
+:100BE0000FBECDBFDF91CF911F910F91FF90EF907E
+:100BF000DF90CF90BF90AF909F908F907F906F903D
+:100C00005F904F903F902F900895089580E090E07E
+:100C100008950F931F93CF93DF932091B4012F5F1B
+:100C2000322F37703093B40120FF02C020E801C09A
+:100C300020E031FD2064347009F02062205FFC0167
+:100C4000EC01239600E011E06485662331F070E04A
+:100C5000C8010E943C1C6F5F01C060E06187322FB9
+:100C6000369F030E30E0311D1124311102C016826F
+:100C700002C031503683662311F06150618731968E
+:100C8000CE17DF0709F7DF91CF911F910F910895DC
+:100C900080E991E00895539A08950F931F93CF939D
+:100CA000DF93CDB7DEB762970FB6F894DEBF0FBE05
+:100CB000CDBF8C01F901DC011C968C917A8369838C
+:100CC0005C834B835E834D8390819D8791819E875A
+:100CD00092819F87813029F4CE0101960E940906F6
+:100CE00006C01C861B861A86198618861F8283E01A
+:100CF000888B1A8A198AD801ED91FC910484F585B4
+:100D0000E02DBE016F5F7F4FC801099562960FB657
+:100D1000F894DEBF0FBECDBFDF91CF911F910F9131
+:100D200008950F931F93CF93DF93CDB7DEB76297EC
+:100D30000FB6F894DEBF0FBECDBF8C01F901DC0108
+:100D40001C968C917A8369835C834B835E834D838D
+:100D500090819D8791819E8792819F87813029F420
+:100D6000CE0101960E94090606C01C861B861A86C3
+:100D7000198618861F82188A1A8A198AD801ED9155
+:100D8000FC910484F585E02DBE016F5F7F4FC801A3
+:100D9000099562960FB6F894DEBF0FBECDBFDF9106
+:100DA000CF911F910F91089580E090E00895FC018C
+:100DB000858596850895CF93DF9300D000D000D02D
+:100DC000CDB7DEB7AB011C821D821E82DC01ED9126
+:100DD000FC910190F081E02D19821A821B829E0104
+:100DE0002F5F3F4FBE016C5F7F4F099526960FB670
+:100DF000F894DEBF0FBECDBFDF91CF9108954F9223
+:100E00005F926F927F928F92AF92BF92CF92DF925A
+:100E1000EF920F931F93CF93DF933C01EB010E945E
+:100E2000BC11F30127853089621B730B6A30710591
+:100E3000B0F3F894E881F9817BB178606BB1677F9A
+:100E40006BB9CA848F812C2D281B822F2F83BF84DE
+:100E50004A805B801D850C85DE841F5F0F5FD39405
+:100E60009E813885A984EB844181D20120E0C32F83
+:100E7000522F322F3181442788943111380F08F4D2
+:100E80003FEF8195889410FD430F4795889411FD9D
+:100E9000430F4795889412FD430F4795889413FD9F
+:100EA000430F4795889414FD430F4795889415FD8B
+:100EB000430F4795889416FD430F4795889417FD77
+:100EC000430F47958894232F1111242F8C0D422F07
+:100ED000002C7BB900C047FF6BB930812227889472
+:100EE00000C000C0002C6BB93111390F00C0002CBC
+:100EF0007BB900C046FF6BB908F43FEF9195889429
+:100F000000C000C0002C6BB900FD230F00C0002CF6
+:100F10007BB900C045FF6BB92795889401FD230F6D
+:100F200000C000C0002C6BB92795889400C0002C2D
+:100F30007BB900C044FF6BB902FD230F279588944D
+:100F400000C000C0002C6BB903FD230F00C0002CB3
+:100F50007BB900C043FF6BB92795889404FD230F2C
+:100F600000C000C0002C6BB92795889400C0002CED
+:100F70007BB900C042FF6BB905FD230F279588940C
+:100F800000C000C0002C6BB906FD230F00C0002C70
+:100F90007BB900C041FF6BB92795889407FD230FEB
+:100FA00000C000C0002C6BB92795889400C0002CAD
+:100FB0007BB900C040FF6BB9432F0111422F9A0D3E
+:100FC00000C000C0002C6BB900C000C0002C7BB971
+:100FD00000C047FF6BB932812227889400C000C04F
+:100FE000002C6BB931113C0F00C0002C7BB900C044
+:100FF00046FF6BB908F43FEFEB0DF11D00C000C0D8
+:10100000002C6BB9D0FC230F00C0002C7BB900C0B2
+:1010100045FF6BB927958894D1FC230F00C000C011
+:10102000002C6BB92795889400C0002C7BB900C0B8
+:1010300044FF6BB9D2FC230F2795889400C000C0F1
+:10104000002C6BB9D3FC230F00C0002C7BB900C06F
+:1010500043FF6BB927958894D4FC230F00C000C0D0
+:10106000002C6BB92795889400C0002C7BB900C078
+:1010700042FF6BB9D5FC230F2795889400C000C0B0
+:10108000002C6BB9D6FC230F00C0002C7BB900C02C
+:1010900041FF6BB927958894D7FC230F00C000C08F
+:1010A000002C6BB92795889400C0002C7BB900C038
+:1010B00040FF6BB9432FD110422FC19500C000C033
+:1010C000002C6BB9CE0D00C000C07BB900C047FF3B
+:1010D0006BB931812227889400C000C0002C6BB905
+:1010E0003111380F00C0002C7BB900C046FF6BB92E
+:1010F00008F43FEF8195889400C000C0002C6BB9C4
+:1011000010FD230F00C0002C7BB900C045FF6BB958
+:101110002795889411FD230F00C000C0002C6BB9E7
+:101120002795889400C0002C7BB900C044FF6BB9A0
+:1011300012FD230F2795889400C000C0002C6BB9C6
+:1011400013FD230F00C0002C7BB900C043FF6BB917
+:101150002795889414FD230F00C000C0002C6BB9A4
+:101160002795889400C0002C7BB900C042FF6BB962
+:1011700015FD230F2795889400C000C0002C6BB983
+:1011800016FD230F00C0002C7BB900C041FF6BB9D6
+:101190002795889417FD230F00C000C0002C6BB961
+:1011A0002795889400C0002C7BB900C040FF6BB924
+:1011B000432F1111422F8C0D00C000C0002C6BB9C1
+:1011C000119709F086CE20EE31E0D2010E94581C22
+:1011D000DC01CB01F4E0B695A79597958795FA9534
+:1011E000D1F720E030E0B901EAE94E9E040C611D20
+:1011F0005E9E600D711D1124650D711D860F971F78
+:10120000A11DB11D893E43E09407A105B10508F475
+:1012100034C0885E9340A109B10942E0B695A79514
+:10122000979587954A95D1F747E0849F080E211D31
+:10123000949F200D311D1124290F311D6091B301A0
+:1012400070E0860F971F820F931F40915B045091AF
+:101250005C0460915D0470915E04292F3327420F76
+:10126000531F611D711D40935B0450935C04609398
+:101270005D0470935E048093B30178940E94BC1166
+:10128000F301708B6787DF91CF911F910F91EF90E2
+:10129000DF90CF90BF90AF908F907F906F905F90D6
+:1012A0004F900895CF93DF93EC0160E08D810E9411
+:1012B000331144E050E080E090E0DC011EBC0DB44E
+:1012C00007FEFDCF2EB5BA2FA92F982F8827822B86
+:1012D0004150510999F727702C8322E1B695A795C3
+:1012E000979587952A95D1F79F70BC0180E090E093
+:1012F0000E946E1920E030E040E85EE30E94AB19E6
+:10130000688379838A839B8361E08D810E94331196
+:10131000DF91CF910895EF92FF920F931F93CF9398
+:10132000DF93EC010E941B120C811D812E813F81F5
+:10133000DC01CB01801B910BA20BB30B088119813F
+:101340002A813B8180179107A207B307F0F10E9421
+:101350001B126C837D838E839F83CE0108960E942F
+:1013600052098A89FE0194E0899FE00DF11D112444
+:10137000488559856A857B85438B548B658B768B35
+:101380008F5F8A3010F48A8B01C01A8A8E010D5E3D
+:101390001F4F7E01EBE3EE0EF11C60E070E0CB012D
+:1013A000F80121913191419151918F010E94041BCB
+:1013B0000E151F05A9F720E030E040E251E40E943D
+:1013C000701B6E877F87888B998BDF91CF911F91E0
+:1013D0000F91FF90EF900895FC01868D882339F0DE
+:1013E0006EBD00000DB407FEFDCF8EB5089528E058
+:1013F00030E090E8A1A1B2A186A5462F492319F0BB
+:101400004C91842B03C04C91809584238C93A3A191
+:10141000B4A14C9187A5842B8C93A3A1B4A14C912A
+:1014200087A5809584238C9396952150310911F7D7
+:10143000089508958CBD9DBD08951F920F920FB61B
+:101440000F9211242F933F934F935F936F937F934A
+:101450008F939F93AF93BF93EF93FF93E0E0F0E000
+:101460000995FF91EF91BF91AF919F918F917F91DE
+:101470006F915F914F913F912F910F900FBE0F9001
+:101480001F90189586E495E00E948B098BE095E00B
+:101490000E948B0980915205882321F088E591E014
+:1014A0000E94E11080911705882321F082E691E0E7
+:1014B0000E94E1102091190530911A0540911B05F9
+:1014C00050911C0560915405709155058091560509
+:1014D000909157050E94041B20E030E040E05FE35C
+:1014E0000E94AB190E94E21BCB010895EF92FF927C
+:1014F0000F931F93CF93DF93EC017B018C010E5F61
+:101500001F4F1B821A821D821C821F821E8240E096
+:1015100050E06AEA71E0C8010E94A10E19821882A7
+:101520006CE671E0C8010E94E10E198618861B86E0
+:101530001A868FEFE816F80671F482E390E099833B
+:10154000888360E771E0C8010E94E10E1986188661
+:101550001B861A8699C08BE5E816F104BCF426E9CF
+:1015600030E0D7010E94581C2AE530E040E050E00E
+:101570000E94691A398328836EE771E0C8010E94CE
+:10158000E10E198618868AE590E07CC085EBE816A6
+:10159000F10484F486E990E09983888369E871E036
+:1015A000C8010E94E10E8BE590E09987888784EB63
+:1015B00090E068C081EFE816F10444F5C701FF0C24
+:1015C000AA0BBB0B9C01AD01245B310941095109F8
+:1015D000AAE5B0E00E94881A2CE330E040E050E039
+:1015E0000E94691ADA01C9018A569F4FAF4FBF4F57
+:1015F000998388836EE871E0C8010E94E10E85EB53
+:1016000090E09987888780EF90E03CC08FE0E816F3
+:1016100081E0F80684F480EF90E0998388836EE897
+:1016200071E0C8010E94E10E81EF90E09987888700
+:101630008EE091E027C0C701FF0CAA0BBB0B9C01F9
+:10164000AD012E50314041095109A0E1BFEF0E9488
+:10165000961A22E330E040E050E00E94691ADA0175
+:10166000C90180519F4FAF4FBF4F9983888366E771
+:1016700071E0C8010E94E10E8FE091E099878887B0
+:1016800080E491E09B878A87CE01DF91CF911F9103
+:101690000F91FF90EF900895CF93DF93EC0180912D
+:1016A000B201811117C081E08093B20161E08BE04B
+:1016B0000E94801161E08DE00E94801160E08CE06A
+:1016C0000E94801161E08AE00E94331184E58CBDA4
+:1016D0008DB58EB561E08D850E94801161E08D85AC
+:1016E0000E943311CE0108960E945209888599857F
+:1016F000AA85BB85FE017396EB9681939193A19386
+:10170000B193EC17FD07C9F7DF91CF910895CF9200
+:10171000DF92EF92FF920F931F93CF93DF936C01B1
+:101720007A018B01C0E0D0E0CE15DF0581F0D80151
+:101730006D918D01D601ED91FC910190F081E02D2C
+:10174000C6010995892B11F02196EECF7E01C701C4
+:10175000DF91CF911F910F91FF90EF90DF90CF908D
+:101760000895FC01538D448D252F30E0842F90E0A7
+:10177000821B930B541710F0CF960895019708958C
+:10178000FC01918D828D981761F0828DDF01A80F89
+:10179000B11D5D968C91928D9F5F9F73928F90E0AB
+:1017A00008958FEF9FEF0895FC01918D828D98171A
+:1017B00031F0828DE80FF11D858D90E008958FEF57
+:1017C0009FEF0895FC01918D228D892F90E0805C20
+:1017D0009F4F821B91098F739927089581E694E0AA
+:1017E0000E94E20B21E0892B09F420E0822F08956A
+:1017F000FC01848DDF01A80FB11DA35ABF4F2C91AE
+:10180000848D90E001968F739927848FA689B7897C
+:101810002C93A089B1898C91837080648C93938D73
+:10182000848D981306C00288F389E02D80818F7D16
+:1018300080830895EF92FF920F931F93CF93DF93CE
+:10184000EC0181E0888F9B8D8C8D981305C0E88911
+:10185000F989808185FD26C0F62E0B8D10E00F5F83
+:101860001F4F0F731127E02E8C8DE8120CC00FB69E
+:1018700007FCFACFE889F989808185FFF5CFCE0191
+:101880000E94F80BF1CF8B8DFE01E80FF11DE35A9A
+:10189000FF4FF0829FB7F8940B8FEA89FB89808114
+:1018A00080620AC09FB7F894EE89FF896083E88957
+:1018B000F98980818370806480839FBF81E090E09C
+:1018C000DF91CF911F910F91FF90EF900895CF93EB
+:1018D000DF93EC01888D8823C9F0EA89FB89808138
+:1018E00085FD05C0A889B9898C9186FD0FC00FB60A
+:1018F00007FCF5CF808185FFF2CFA889B9898C914B
+:1019000085FFEDCFCE010E94F80BE7CFDF91CF919D
+:10191000089580E090E0892B29F00E94EE0B811160
+:101920000C9400000895EF92FF920F931F93DC0137
+:101930001A960D911C911B9718962D913C91199711
+:10194000ED91FC910288F389E02D7B0140E050E0AD
+:1019500060E070E009951F910F91FF90EF9008955E
+:101960000E944C1EAF92BF92CF92DF92EF92FF92F5
+:101970000F931F93CF93DF93EC01590168012885E2
+:101980003985621773070CF075C08A859B854817E7
+:1019900059070CF06FC0FB01EA0DFB1D2E173F0726
+:1019A0001CF45901A61AB70A9A012C0D3D1D821785
+:1019B00093071CF46C01C41AD50A8D8D823091F402
+:1019C0009701322F2227330F330F330FC701807E49
+:1019D0009770822B932BEF2CFF24E694E694E694E9
+:1019E000E82AF92A0FEF040F0C0D2FEF260F2A0D0E
+:1019F000CE010E94F4108E8D882321F08F8D98A146
+:101A00000E941A0AEFA1F8A5908189A9892B8083E9
+:101A1000EDA1FEA1908188A98095892380831C1463
+:101A20001D049CF48501101611065CF46F2DCE0187
+:101A30000E94EC096E2DCE010E94EC0901501109A3
+:101A4000F2CF81E0C81AD108EACFEDA1FEA19081C2
+:101A500088A9892B80838E8D882361F0DF91CF91B7
+:101A60001F910F91FF90EF90DF90CF90BF90AF90BC
+:101A70000C94190ADF91CF911F910F91FF90EF9075
+:101A8000DF90CF90BF90AF900895CF92DF92EF920A
+:101A9000FF920F931F93CF93DF93EC0169017801BD
+:101AA00088859985681779070CF061C02A853B8580
+:101AB000421753070CF05BC09B012C0D3D1D821794
+:101AC00093071CF46C01C61AD70A2FEF260F2C0DB2
+:101AD000042FCE010E94F4108D8D823091F4970175
+:101AE000322F2227330F330F330FC701807E9770B9
+:101AF000822B932BEF2CFF24E694E694E694E82ABD
+:101B0000F92A8E8D882321F08F8D98A10E941A0AC0
+:101B1000EFA1F8A5908189A9892B8083EDA1FEA171
+:101B2000908188A9809589238083C114D10461F0B4
+:101B30006F2DCE010E94EC096E2DCE010E94EC09A2
+:101B400081E0C81AD108F1CFEDA1FEA1908188A94A
+:101B5000892B80838E8D882351F0DF91CF911F9147
+:101B60000F91FF90EF90DF90CF900C94190ADF91C6
+:101B7000CF911F910F91FF90EF90DF90CF9008953C
+:101B8000CF92DF92EF92FF920F931F93CF93DF9349
+:101B9000EC016901780188859985681779070CF04F
+:101BA00062C08A859B85481759070CF05CC09A0172
+:101BB0002C0D3D1D821793071CF46C01C41AD50A25
+:101BC0000FEF040F0C0D262FCE010E94F4108D8D07
+:101BD000823091F49701322F2227330F330F330FC6
+:101BE000C701807E9770822B932BEF2CFF24E69405
+:101BF000E694E694E82AF92A0F2D8E8D882321F0A9
+:101C00008F8D98A10E941A0AEFA1F8A5908189A949
+:101C1000892B8083EDA1FEA1908188A980958923DD
+:101C20008083C114D10461F0602FCE010E94EC09C1
+:101C30006E2DCE010E94EC0981E0C81AD108F1CFC7
+:101C4000EDA1FEA1908188A9892B80838E8D8823A8
+:101C500051F0DF91CF911F910F91FF90EF90DF90A6
+:101C6000CF900C94190ADF91CF911F910F91FF90A3
+:101C7000EF90DF90CF900895EF92FF920F93CF9364
+:101C8000DF93EC01790177FD56C088859985681747
+:101C900079070CF050C057FD4EC08A859B854817C8
+:101CA00059070CF048C001E0040F21E0260FCE01D7
+:101CB0000E94F4108E8D882321F08F8D98A10E94B0
+:101CC0001A0AEFA1F8A5908189A9892B8083EDA13B
+:101CD000FEA1908188A98095892380838D8D823093
+:101CE00091F49701322F2227330F330F330FC7019F
+:101CF000807E9770822B932BEF2CFF24E694E69442
+:101D0000E694E82AF92A6F2DCE010E94EC096E2D87
+:101D1000CE010E94EC09EDA1FEA1908188A9892B3A
+:101D200080838E8D882339F0DF91CF910F91FF90C2
+:101D3000EF900C94190ADF91CF910F91FF90EF90E3
+:101D40000895EF92FF920F931F93CF93DF93EC01CF
+:101D50007B018A0188819981009729F02A813B8142
+:101D600024173507F8F4B8016F5F7F4F0E94861D76
+:101D7000009759F0998388831B830A832C813D81C6
+:101D8000232B81F4FC0110820DC08881998100977A
+:101D900011F00E94FD1C198218821D821C821B8278
+:101DA0001A8207C01D830C83B701888199810E9424
+:101DB0005A1ECE01DF91CF911F910F91FF90EF90AE
+:101DC0000895CF93DF93EC016115710559F0FB0184
+:101DD00001900020E9F73197AF01461B570B0E9495
+:101DE000A10E0CC088819981009711F00E94FD1C02
+:101DF000198218821D821C821B821A82CE01DF91F9
+:101E0000CF910895FC01808191810C94FD1C611596
+:101E1000710579F0FB0101900020E9F73197AF01DE
+:101E2000461B570BDC01ED91FC910280F381E02D04
+:101E3000099480E090E008951F920F920FB60F92E0
+:101E400011242F933F934F935F936F937F938F93BF
+:101E50009F93AF93BF93EF93FF9381E694E00E942B
+:101E6000F80BFF91EF91BF91AF919F918F917F916F
+:101E70006F915F914F913F912F910F900FBE0F90F7
+:101E80001F9018951F920F920FB60F9211242F9347
+:101E90008F939F93EF93FF93E0917104F0917204FD
+:101EA0008081E0917704F091780482FD12C09081E6
+:101EB00080917A048F5F8F7320917B04821751F099
+:101EC000E0917A04F0E0EF59FB4F958F80937A040C
+:101ED00001C08081FF91EF919F918F912F910F9081
+:101EE0000FBE0F901F9018951F93CF93DF93EC01B7
+:101EF000162F8E8D882321F08F8D98A10E941A0AAB
+:101F0000EFA1F8A5908189A9892B8083EDA1FEA17D
+:101F1000908188A9809589238083612FCE010E94BA
+:101F2000EC09EDA1FEA1908188A9892B80838E8D7B
+:101F3000882329F0DF91CF911F910C94190ADF912A
+:101F4000CF911F9108951F93CF93DF93EC01162F2C
+:101F50008E8D882321F08F8D98A10E941A0AEFA1FF
+:101F6000F8A5908189A9809589238083EDA1FEA1A0
+:101F7000908188A9809589238083612FCE010E945A
+:101F8000EC09EDA1FEA1908188A9892B80838E8D1B
+:101F9000882329F0DF91CF911F910C94190ADF91CA
+:101FA000CF911F910895611102C060E201C061E20A
+:101FB0000C94A30FEF92FF920F931F9320919A0519
+:101FC0002223B9F1FA01AC0100919805109199050D
+:101FD0006115710591F48E179F0724F49F01281B4A
+:101FE000390B04C09C012E1B3F0BAF0160E070E079
+:101FF00081E895E00E94C00D1CC08E179F0781F4F8
+:102000001616170624F49B0160E070E004C0222736
+:102010003327261B370B81E895E00E94450D09C048
+:1020200078018F019B0160E070E081E895E00E94FB
+:1020300053051F910F91FF90EF900895242F462F85
+:10204000682F81E895E00E943603E1E8F5E021E0A1
+:10205000218F908F878B918B808B938B828B0895B0
+:1020600020919A052223D9F0109297052091980586
+:102070003091990530939205209391053093940502
+:102080002093930570938E0560938D055093900572
+:1020900040938F05BC0181E895E00C94070F0895EB
+:1020A0000F931F93CF93DF93FC01C481D5812097B9
+:1020B00019F4FB01108211C0415051094C175D0702
+:1020C00008F4EA018B01FC0160817181AE01C80155
+:1020D0000E94611EC00FD11F1882DF91CF911F9106
+:1020E0000F9108950F931F93CF93DF93CDB7DEB772
+:1020F00062970FB6F894DEBF0FBECDBF8C01CB0147
+:10210000F8011182108213821282158214824AE031
+:10211000BE016F5F7F4F0E943919BE016F5F7F4F15
+:10212000C8010E94E10E62960FB6F894DEBF0FBEA2
+:10213000CDBFDF91CF911F910F9108958F929F9204
+:10214000AF92BF920F931F93CF93DF93CDB7DEB7BC
+:10215000A1970FB6F894DEBF0FBECDBF19A24230D3
+:1021600008F44AE08E010F5D1F4F842E912CA12CA4
+:10217000B12CA50194010E94D21AE62FB901CA011F
+:1021800001501109EA3014F4E05D01C0E95CD801A6
+:10219000EC93232B242B252B61F7B80181E694E0E7
+:1021A0000E94070FA1960FB6F894DEBF0FBECDBFF9
+:1021B000DF91CF911F910F91BF90AF909F908F9023
+:1021C0000895CF93DF93BC0181E694E00E94070F4E
+:1021D000EC0168EA71E081E694E00E94070F8C0F41
+:1021E0009D1FDF91CF910895EF92FF920F931F9360
+:1021F000CF93DF93EC01E62E142FF22E6AE20E94B9
+:10220000A30F60E0CE010E94740F6AA96E0DCE018B
+:102210000E94740F60E0CE010E94740F6AA96F0DD6
+:10222000CE010E94740F6BE2CE010E94A30F60E00A
+:10223000CE010E94740F6BA9610FCE010E94740F32
+:1022400060E0CE010E94740F6BA9600FCE010E9466
+:10225000740F6CE2CE01DF91CF911F910F91FF902F
+:10226000EF900C94A30F90E0FC01EF5FF94F2491E5
+:10227000FC01E351FA4F3491FC01E752FA4FE4912B
+:10228000EE2309F43CC0222339F1233091F038F4D5
+:102290002130A9F0223001F584B58F7D12C027309E
+:1022A00091F02830A1F02430B9F4809180008F7D26
+:1022B00003C0809180008F77809380000DC084B52B
+:1022C0008F7784BD09C08091B0008F7703C0809163
+:1022D000B0008F7D8093B000F0E0EE0FFF1FE15360
+:1022E000FA4FA591B4919FB7F894611104C08C91F5
+:1022F0003095382302C0EC913E2B3C939FBF08954C
+:10230000CF93DF9390E0FC01E351FA4F2491FC015D
+:10231000E752FA4F8491882361F190E0880F991F6A
+:10232000FC01EB53FA4FC591D491FC01E153FA4FF4
+:10233000A591B491611109C09FB7F8948881209547
+:1023400082238883EC912E230BC0623061F49FB707
+:10235000F8948881322F309583238883EC912E2B3B
+:102360002C939FBF06C08FB7F894E8812E2B28834B
+:102370008FBFDF91CF9108953FB7F8948091B60554
+:102380009091B705A091B805B091B90526B5A89B65
+:1023900005C02F3F19F00196A11DB11D3FBFBA2FF7
+:1023A000A92F982F8827820F911DA11DB11DBC0157
+:1023B000CD0142E0660F771F881F991F4A95D1F71C
+:1023C00008958F929F92AF92BF92CF92DF92EF9239
+:1023D000FF926B017C010E94BC114B015C01C11496
+:1023E000D104E104F104F1F00E94BC11DC01CB0145
+:1023F00088199909AA09BB09883E9340A105B1052E
+:1024000070F321E0C21AD108E108F10888EE880EC5
+:1024100083E0981EA11CB11CC114D104E104F10495
+:1024200019F7DDCFFF90EF90DF90CF90BF90AF9086
+:102430009F908F9008952FB7F89460915B047091EE
+:102440005C0480915D0490915E042FBF08953F92DB
+:102450004F925F926F927F928F929F92AF92BF92B4
+:10246000CF92DF92EF92FF920F931F93CF93DF9360
+:1024700000D01F92CDB7DEB7F82E80910105909164
+:102480000205A0910305B0910405892B8A2B8B2BA3
+:10249000E9F00E94BC110091C0051091C105209186
+:1024A000C2053091C305DC01CB01801B910BA20B4F
+:1024B000B30B0091010510910205209103053091A5
+:1024C000040580179107A207B307B8F20E94BC1158
+:1024D0006093C0057093C1058093C2059093C305B6
+:1024E000E0910905F0910A05309759F040910505F2
+:1024F0005091060560910705709108058F2D09958B
+:10250000F82E00915F04109160044F2C512C612C27
+:10251000712C0115110509F45FC0D8011C96EC90CF
+:102520001C978091FF04909100058436910510F46A
+:102530001C961C92D801ED91FC91A280B380198267
+:102540001A821B82F11014C0F801458556856281FC
+:1025500073819E012F5F3F4FC801F5010995D80196
+:102560001C96EC921C9714960D911C911597D1CF47
+:10257000F8013696CE0101966C01480199E0890E6A
+:10258000911C2191222309F132803320F1F0822F16
+:1025900090E0A0E0B0E09C01AD012F5F3F4F4F4FB6
+:1025A0005F4FC301B2010E94181C9B01AC01832D37
+:1025B00090E0A0E0B0E0BC01CD016F5F7F4F8F4F96
+:1025C0009F4F0E94181CD6018C93BFEFCB1ADB0AD9
+:1025D000E815F905B1F6B8CF8091BE059091BF0519
+:1025E0008C010F5F1F4F1093BF050093BE054997E5
+:1025F0009CF10E941B124B015C0188EE93E0089F46
+:10260000B001099F700D189F700D1124072E000C4A
+:10261000880B990BC090BA05D090BB05E090BC0523
+:10262000F090BD05A50194012C193D094E095F09E3
+:102630000E94D21A309300052093FF041092BF0528
+:102640001092BE050E941B126093BA057093BB05E1
+:102650008093BC059093BD050F900F900F90DF9174
+:10266000CF911F910F91FF90EF90DF90CF90BF908F
+:10267000AF909F908F907F906F905F904F903F9022
+:1026800008951F920F920FB60F9211242F933F932C
+:102690008F939F93AF93BF9380915B0490915C0461
+:1026A000A0915D04B0915E043091B50523E0230F45
+:1026B0002D3720F40196A11DB11D05C026E8230F7A
+:1026C0000296A11DB11D2093B50580935B049093E4
+:1026D0005C04A0935D04B0935E048091B605909174
+:1026E000B705A091B805B091B9050196A11DB11D1E
+:1026F0008093B6059093B705A093B805B093B9053C
+:10270000BF91AF919F918F913F912F910F900FBEED
+:102710000F901F901895CF93DF93CDB7DEB7E59755
+:102720000FB6F894DEBF0FBECDBF789484B582603B
+:1027300084BD84B5816084BD85B5826085BD85B565
+:10274000816085BD80916E00816080936E001092E3
+:10275000810080918100826080938100809181005E
+:1027600081608093810080918000816080938000EF
+:102770008091B10084608093B1008091B00081604D
+:102780008093B00080917A00846080937A00809179
+:102790007A00826080937A0080917A0081608093D1
+:1027A0007A0080917A00806880937A001092C1004C
+:1027B00061E084E00E94801161E085E00E94801168
+:1027C00061E082E00E94801161E084E00E943311A8
+:1027D00061E085E00E94331161E082E00E943311E4
+:1027E000E0917104F091720482E08083E0916D04C5
+:1027F000F0916E041082E0916F04F09170048FEC00
+:10280000808310927904E0917504F091760486E05B
+:102810008083E0917304F0917404808180618083EF
+:10282000E0917304F0917404808188608083E0916A
+:102830007304F0917404808180688083E091730454
+:10284000F091740480818F7D808385E991E00E94FE
+:10285000E1101092B4051092B30561E08091AB05D0
+:102860000E94801161E08091AA050E9480118091F0
+:10287000AA0590E0FC01E752FA4FE491F0E0EE0F78
+:10288000FF1FE153FA4F259134913093A705209310
+:10289000A605FC01E351FA4FE491E093B105809164
+:1028A000AB0590E0FC01E752FA4FE491F0E0EE0F47
+:1028B000FF1FE153FA4F259134913093A9052093DE
+:1028C000A805FC01E351FA4FE491E093B205809131
+:1028D0009F05882309F439C01FB7F8948091B5018A
+:1028E000811127C0E3EEF5E08491E7EFF5E09491E4
+:1028F000E82FF0E0EE0FFF1FEB53FA4FA591B491D4
+:10290000EC91E92321F461E08AE00E94331161E057
+:102910008AE00E9480118CB580618CBD8CB580648A
+:102920008CBD61E08DE00E94801161E08BE00E942F
+:1029300080118091B5018F5F8093B5011FBF80E545
+:102940008093A0051092A10549C061E08091AE0579
+:102950000E94801161E08091AD050E9480118091FC
+:10296000AE0590E0FC01E752FA4FE491F0E0EE0F83
+:10297000FF1FE153FA4FA591B491B093A505A09321
+:10298000A405FC01E351FA4F84918093B005209196
+:10299000AD0530E0F901E752FA4FE491F0E0EE0FB7
+:1029A000FF1FE153FA4F459154915093A305409373
+:1029B000A205F901E351FA4FE491E093AF059C9130
+:1029C000E82FE095E923EC93E091A205F091A305AF
+:1029D00090818091AF05809589238083E091A60541
+:1029E000F091A70590818091B1058095892380831E
+:1029F0008091AC05882321F161E00E94801161E0A3
+:102A00008091AC050E94331164EF71E080E090E0AA
+:102A10000E94E11160E08091AC050E94331164EFE7
+:102A200071E080E090E00E94E11161E08091AC05EE
+:102A30000E94331164EF71E080E090E00E94E111A8
+:102A4000E3E6F5E0B49004E615E0BB2009F439C0F4
+:102A5000F801649181E895E00E94A30F6801F2E01B
+:102A6000CF0ED11CF80131960491202F2078A22E90
+:102A70000F774601102F115050F0F401649181E856
+:102A800095E00E94740FFFEF8F1A9F0AF4CFC601E2
+:102A9000800F911D8C01A11002C0BA94D6CF6C0199
+:102AA0009FEFC91AD90AF801649170E06F3F710570
+:102AB00011F464EF71E080E090E00E94E111860182
+:102AC000ECCF66E381E895E00E94A30F11E010933C
+:102AD000960568EA81E895E00E94740F80EA90E02C
+:102AE00090938A058093890580E890E090938C0507
+:102AF00080938B0560E070E081E895E00E94930C84
+:102B000086E495E00E944C0B8BE095E00E944C0B14
+:102B10008091C901811144C01092BB011092BA0189
+:102B20008FEF8093BE018093BF018093C00180939B
+:102B3000C1018093C2018093C3011093C40110921C
+:102B4000C6011092C5011092BD011092BC01809186
+:102B50005F0490916004892B31F488EB91E09093AD
+:102B6000600480935F04E091B601F091B701309763
+:102B700021F088EB91E09583848388EB91E090933A
+:102B8000B7018093B6011092C8011092C7018AE183
+:102B900091E09093B9018093B80181E08093C901DD
+:102BA000539A81E594E09093BB018093BA0181E050
+:102BB00090E09093C6018093C501809101059091AA
+:102BC0000205A0910305B0910405843CF9E09F073C
+:102BD000A105B10520F484EC99E0A0E0B0E0809379
+:102BE000010590930205A0930305B093040510928C
+:102BF000510410925204109253048091FE040E94DA
+:102C0000271281E080935A041092550410925404C4
+:102C10000E941B12609356047093570480935804CB
+:102C20009093590430E4432E55245394612C712C15
+:102C300080915A04811101C0FFCF0E941B120091A4
+:102C400056041091570420915804309159040851AA
+:102C50001C4F2F4F3F4F0617170728073907A8F5B6
+:102C60000E941B126093560470935704809358047B
+:102C70009093590400915404109155040E94420A03
+:102C8000000F111FF801EF52FE4F91838083809156
+:102C900054049091550401969093550480935404E4
+:102CA00062EA71E081E694E00E94070F60915404AB
+:102CB0007091550480E090E04AE00E949E1068EA1E
+:102CC00071E081E694E00E94070F0E94420A4C01E5
+:102CD0006091540470915504CE0145960E94760A85
+:102CE0000E94420A2D893E89255031098217930797
+:102CF0009CF48FEF8093510410925204109253046D
+:102D00008091FE040E94271260E084E00E9433114B
+:102D100060E085E00E9433110E94420A2D893E89BD
+:102D2000281739079CF41092510480E880935204CC
+:102D3000109253048091FE040E94271261E084E007
+:102D40000E94331161E085E00E943311A090540489
+:102D5000B0905504C50165E070E00E94281C6C012C
+:102D6000892B09F080C1E12CF12C00E810E020EA69
+:102D700030E040E050E060E070E081E895E00E94E3
+:102D8000B20C0D891E89B401CE0187960E94721083
+:102D900043E050E0BE016D5C7F4FCE0187960E94FC
+:102DA0005010B501CE0181960E94721043E050E0B0
+:102DB000BE01605D7F4FCE0181960E945010B80128
+:102DC000CE0101960E94721043E050E0BE01635DA7
+:102DD0007F4FCE0101960E9450104FEF6FEF8FEFA3
+:102DE0000E941E1082E08093950540E050E060E074
+:102DF00070E0CE01C3960E94301040E050E067E3DF
+:102E000070E0CE01C0960E94301040E050E06EE6C7
+:102E100070E0CE018D960E9430104FEF60E080E0B0
+:102E20000E941E1041E150E060EA70E081E190E014
+:102E30000E94DA0F42E150E060EA70E082E190E047
+:102E40000E94DA0FCE0101960E94020FCE018196F8
+:102E50000E94020FCE0187960E94020F4FEF6FEF84
+:102E60008FEF0E941E10812C912C54014AE0C50165
+:102E7000B4010E949E1068EA71E081E694E00E942D
+:102E8000070FB601CE0101960E94760A09811A81C8
+:102E9000CE0103960E94020F80919A058823C9F003
+:102EA000E0909805F09099059801A6EABFEF0E947E
+:102EB000501CA30192010E94691ABA01A901435949
+:102EC0005F4F6F4F7F4F9701B40181E895E00E94FB
+:102ED0003C0E2FEF821A920AA20AB20A82E0C80EB2
+:102EE000D11C92E4C91691E0D90609F0BFCFE09059
+:102EF0005404F09055041AA219A21CA21BA21EA2EF
+:102F00001DA26F89788D6115710531F04B8D5C8D37
+:102F1000CE0181960E94A10E44E150E0BE016F5F98
+:102F20007F4FCE0181960E9450104FEF6FEF8FEFD1
+:102F30000E941E1081E08093950549E150E060E019
+:102F400070E0CE0101960E94301040E060E08FEF0B
+:102F50000E941E1001ED11E0812C912C5401C12C16
+:102F6000D12CEC14FD04BCF14AE0C501B4010E946F
+:102F70009E1068EA71E081E694E00E94070F80915C
+:102F80009A058823E9F02090980530909905F8017A
+:102F9000A081B18126EA3FEF4FEF5FEF0E94881AD0
+:102FA000A30192010E94691ABA01A90143595F4F16
+:102FB0006F4F7F4F9101B60181E895E00E943C0E72
+:102FC000FFEFCF1ADF0A0C5F1F4F2FEF821A920A12
+:102FD000A20AB20AC6CFCE0181960E94020F1AA29F
+:102FE00019A21CA21BA21EA21DA246E050E06BEA81
+:102FF00071E0CE0181960E94A10E44E150E0BE0135
+:103000006F5F7F4FCE0181960E9450104FEF6FEFA0
+:103010008FEF0E941E1082E08093950542E750E0FA
+:1030200060E070E0CE0101960E9430104FEF60E04A
+:1030300080E00E941E106091890570918A054EE61D
+:1030400050E08EE690E00E94DA0F60918905709161
+:103050008A054FE650E08FE690E00E94DA0FCE013D
+:1030600081960E94020FCE0147960E94020F0E9495
+:10307000890CDECD109264041092630488EE93E014
+:10308000A0E0B0E08093650490936604A093670489
+:10309000B09368048CE291E09093620480936104A1
+:1030A00085EC90E090936E0480936D0484EC90E046
+:1030B0009093700480936F0480EC90E0909372047E
+:1030C0008093710481EC90E0909374048093730476
+:1030D00082EC90E0909376048093750486EC90E007
+:1030E000909378048093770410927A0410927B0472
+:1030F00010927C0410927D048FEF8093FE04109256
+:1031000000051092FF0410920A05109209058FEF36
+:103110009FEFDC018093050590930605A0930705BA
+:10312000B0930805109284051092830520E830E0E2
+:10313000309386052093850540EA50E0509388053A
+:10314000409387051092960510928E0510928D057A
+:103150001092900510928F0581E0809395056FEF96
+:103160007FEF70939405609393057093920560933D
+:1031700091058093970590E59093A0051092A10585
+:103180009AE09093AA0599E09093AB0598E090930C
+:10319000AC0580939F051092AE051092AD058EE3AD
+:1031A00091E0909382058093810550938A05409326
+:1031B000890530938C0520938B0586E08093530519
+:1031C0001092520510924E0510924F051092500524
+:1031D0001092510584E690E0A0E0B0E080934605AF
+:1031E00090934705A0934805B093490510924A056E
+:1031F00010924B0510924C0510924D05E9E5F5E053
+:1032000081E895E011921192119211928E179F0709
+:10321000C9F71092580587E080931805109217059A
+:1032200010921305109214051092150510921605B0
+:1032300084E690E0A0E0B0E080930B0590930C054D
+:10324000A0930D05B0930E0510920F051092100576
+:103250001092110510921205EEE1F5E01192119213
+:103260001192119285E0E634F807C1F710921D051E
+:103270000895BB274A3031F4992322F4BDE290959A
+:1032800081959F4F0C944519BB27FB015527AA2711
+:10329000880F991FAA1FA41710F0A41B83955051E3
+:1032A000B9F7A05DAA3308F0A95DA193009779F75B
+:1032B000B111B1931192CB010C945E19DC01FC01A8
+:1032C000672F71917723E1F7329704C07C916D935A
+:1032D00070836291AE17BF07C8F30895E89409C0E0
+:1032E00097FB3EF490958095709561957F4F8F4F39
+:1032F0009F4F9923A9F0F92F96E9BB279395F6954F
+:10330000879577956795B795F111F8CFFAF4BB0FCC
+:1033100011F460FF1BC06F5F7F4F8F4F9F4F16C030
+:10332000882311F096E911C0772321F09EE8872FBA
+:10333000762F05C0662371F096E8862F70E060E076
+:103340002AF09A95660F771F881FDAF7880F9695EF
+:10335000879597F908950E94BE190C942F1A0E9420
+:10336000211A38F00E94281A20F0952311F00C94AD
+:10337000181A0C941E1A11240C94631A0E94401AF5
+:1033800070F3959FC1F3950F50E0551F629FF001B8
+:10339000729FBB27F00DB11D639FAA27F00DB11DD1
+:1033A000AA1F649F6627B00DA11D661F829F22275A
+:1033B000B00DA11D621F739FB00DA11D621F839FE1
+:1033C000A00D611D221F749F3327A00D611D231FB7
+:1033D000849F600D211D822F762F6A2F11249F5705
+:1033E00050409AF0F1F088234AF0EE0FFF1FBB1F08
+:1033F000661F771F881F91505040A9F79E3F5105C7
+:1034000080F00C94181A0C94631A5F3FE4F3983E12
+:10341000D4F3869577956795B795F795E7959F5F70
+:10342000C1F7FE2B880F911D9695879597F9089502
+:1034300097F99F6780E870E060E008959FEF80EC67
+:10344000089500240A94161617061806090608950A
+:1034500000240A9412161306140605060895092E70
+:103460000394000C11F4882352F0BB0F40F4BF2BDF
+:1034700011F460FF04C06F5F7F4F8F4F9F4F08951F
+:1034800057FD9058440F551F59F05F3F71F0479515
+:10349000880F97FB991F61F09F3F79F087950895FA
+:1034A000121613061406551FF2CF4695F1DF08C019
+:1034B000161617061806991FF1CF86957105610536
+:1034C00008940895E894BB2766277727CB0197F9DE
+:1034D0000895052E97FB1EF400940E94801A57FD54
+:1034E00007D00E94D21A07FC03D04EF40C94801A25
+:1034F00050954095309521953F4F4F4F5F4F089520
+:1035000090958095709561957F4F8F4F9F4F08954F
+:103510000E94F41AA59F900DB49F900DA49F800D5A
+:10352000911D11240895B7FF0C94881A0E94881ADF
+:10353000821B930B08952F923F924F925F926F924E
+:103540007F928F929F92AF92BF92CF92DF92EF9233
+:10355000FF920F931F93CF93DF93CDB7DEB7CA1BB4
+:10356000DB0B0FB6F894DEBF0FBECDBF09942A88DF
+:10357000398848885F846E847D848C849B84AA8487
+:10358000B984C884DF80EE80FD800C811B81AA8114
+:10359000B981CE0FD11D0FB6F894DEBF0FBECDBFDF
+:1035A000ED010895A1E21A2EAA1BBB1BFD010DC05F
+:1035B000AA1FBB1FEE1FFF1FA217B307E407F507E3
+:1035C00020F0A21BB30BE40BF50B661F771F881FBF
+:1035D000991F1A9469F760957095809590959B0155
+:1035E000AC01BD01CF010895A29FB001B39FC001FE
+:1035F000A39F700D811D1124911DB29F700D811D1F
+:103600001124911D08955058BB27AA270E941B1B07
+:103610000C942F1A0E94211A38F00E94281A20F0C8
+:1036200039F49F3F19F426F40C941E1A0EF4E09519
+:10363000E7FB0C94181AE92F0E94401A58F3BA17A6
+:10364000620773078407950720F079F4A6F50C94B8
+:10365000621A0EF4E0950B2EBA2FA02D0B01B901C2
+:1036600090010C01CA01A0011124FF27591B99F0F8
+:10367000593F50F4503E68F11A16F040A22F232F04
+:10368000342F4427585FF3CF469537952795A79554
+:10369000F0405395C9F77EF41F16BA0B620B730BFB
+:1036A000840BBAF09150A1F0FF0FBB1F661F771F6C
+:1036B000881FC2F70EC0BA0F621F731F841F48F421
+:1036C000879577956795B795F7959E3F08F0B0CFAA
+:1036D0009395880F08F09927EE0F97958795089591
+:1036E0000E94841B0C942F1A0E94281A58F00E94E2
+:1036F000211A40F029F45F3F29F00C94181A511157
+:103700000C94631A0C941E1A0E94401A68F39923B1
+:10371000B1F3552391F3951B550BBB27AA276217CD
+:103720007307840738F09F5F5F4F220F331F441FDA
+:10373000AA1FA9F335D00E2E3AF0E0E832D091500E
+:103740005040E695001CCAF72BD0FE2F29D0660FFB
+:10375000771F881FBB1F261737074807AB07B0E83E
+:1037600009F0BB0B802DBF01FF2793585F4F3AF044
+:103770009E3F510578F00C94181A0C94631A5F3F21
+:10378000E4F3983ED4F3869577956795B795F795CA
+:103790009F5FC9F7880F911D9695879597F90895B2
+:1037A000E1E0660F771F881FBB1F6217730784074E
+:1037B000BA0720F0621B730B840BBA0BEE1F88F75D
+:1037C000E09508950E94E91B6894B1110C94631A66
+:1037D00008950E94481A88F09F5798F0B92F9927AA
+:1037E000B751B0F0E1F0660F771F881F991F1AF0EC
+:1037F000BA95C9F714C0B13091F00E94621AB1E0D5
+:1038000008950C94621A672F782F8827B85F39F0D3
+:10381000B93FCCF3869577956795B395D9F73EF484
+:1038200090958095709561957F4F8F4F9F4F08952C
+:10383000DB018F939F930E94881ABF91AF91A29F43
+:10384000800D911DA39F900DB29F900D112408959E
+:10385000AA1BBB1B51E107C0AA1FBB1FA617B707B6
+:1038600010F0A61BB70B881F991F5A95A9F78095D2
+:103870009095BC01CD01089597FB072E16F4009496
+:1038800007D077FD09D00E94281C07FC05D03EF424
+:10389000909581959F4F0895709561957F4F0895FC
+:1038A0000E94F41A332312F48A1B9B0B0C945A1CAB
+:1038B0000E94F41AB7FF0895821B930B0895EE0F30
+:1038C000FF1F0590F491E02D09940F931F93CF9360
+:1038D000DF938230910510F482E090E0E091C6051C
+:1038E000F091C70520E030E0A0E0B0E0309719F19A
+:1038F000408151810281138148175907C8F084170C
+:10390000950769F4109731F012960C93129713965D
+:103910001C9327C00093C6051093C70522C021152C
+:10392000310519F04217530718F49A01BD01EF0150
+:10393000DF01F801DBCF21153105F9F0281B390B28
+:103940002430310580F48A819B816115710521F055
+:10395000FB019383828304C09093C7058093C605BF
+:10396000FE01329644C0FE01E20FF31F8193919352
+:1039700022503109398328833AC02091C4053091FF
+:10398000C505232B41F420910201309103013093AE
+:10399000C5052093C4052091000130910101211536
+:1039A000310541F42DB73EB7409104015091050116
+:1039B000241B350BE091C405F091C505E217F30710
+:1039C000A0F42E1B3F0B2817390778F0AC014E5F8F
+:1039D0005F4F2417350748F04E0F5F1F5093C50502
+:1039E0004093C4058193919302C0E0E0F0E0CF01E1
+:1039F000DF91CF911F910F910895CF93DF9300979F
+:103A000009F481C0FC01329713821282A091C6058D
+:103A1000B091C705109781F420813181820F931FE7
+:103A20002091C4053091C5052817390751F5F09349
+:103A3000C505E093C40567C0ED0120E030E0CE1776
+:103A4000DF0740F44A815B819E0141155105F1F089
+:103A5000EA01F5CFD383C28340815181840F951F42
+:103A6000C817D90759F488819981840F951F029648
+:103A7000918380838A819B81938382832115310581
+:103A800029F4F093C705E093C6053DC0E901FB8327
+:103A9000EA8349915991C40FD51FEC17FD0761F4D2
+:103AA00080819181840F951F0296E9019983888313
+:103AB000828193819B838A83E0E0F0E012968D916E
+:103AC0009C911397009719F0FD01DC01F7CF8D91C0
+:103AD0009C9111979D012E5F3F4F820F931F209164
+:103AE000C4053091C5052817390769F4309729F4C2
+:103AF0001092C7051092C60502C013821282B093BD
+:103B0000C505A093C405DF91CF910895A0E0B0E072
+:103B1000ECE8FDE10C949F1AEC01009721F4CB0135
+:103B20000E94651CB4C0FC01E60FF71F9C012250E7
+:103B30003109E217F30708F4A8C0D9010D911C91CF
+:103B4000119706171707B0F00530110508F49BC050
+:103B5000C80104978617970708F495C00250110909
+:103B6000061B170B019311936D937C93CF010E9459
+:103B7000FD1C89C05B01A01AB10A4C01800E911E88
+:103B8000A091C605B091C705612C712CE12CF12CD8
+:103B9000109709F446C08D919C911197A815B9050D
+:103BA000B1F56C0142E0C40ED11CCA14DB0478F1FB
+:103BB0004C018A189B08640142E0C40ED11C129685
+:103BC000BC9012971396AC91B5E0CB16D10440F09F
+:103BD000B282A38391828082D9016D937C9309C0C4
+:103BE0000E5F1F4F800F911FF90191838083EB2D92
+:103BF000FA2FE114F10431F0D7011396FC93EE9300
+:103C0000129741C0F093C705E093C6053CC0681603
+:103C1000790608F43C017D0112960D90BC91A02D0F
+:103C2000B7CF8091C4059091C50588169906E1F437
+:103C300066167706C8F48091000190910101009703
+:103C400041F48DB79EB74091040150910501841B4A
+:103C5000950BE817F907C8F4F093C505E093C40580
+:103C6000F901718360830FC0CB010E94651C7C0148
+:103C7000009759F0A801BE010E94511ECE010E947A
+:103C8000FD1CC70104C0CE0102C080E090E0CDB7AA
+:103C9000DEB7EEE00C94BB1A81E090E0F8940C944F
+:103CA000701EFB01DC0102C001900D92415050409A
+:103CB000D8F70895FB01DC0101900D920020E1F797
+:103CC0000895FB01DC014150504048F001900D92F5
+:103CD0000020C9F701C01D9241505040E0F70895FF
+:043CE000F894FFCF86
+:103CE4000000C805800000000000B00CB00CB00C4F
+:103CF400DB06D706D4060000000091064D064B06ED
+:103D0400DB06D7064806FF06000000001A0C870BE6
+:103D1400B10B670CE20BC00BD40B0000000047038F
+:103D2400870B060605063C0E5305C00D450D04051C
+:103D3400B20C930CD30F36034572726F7220746306
+:103D440031004572726F7220746332003430340073
+:103D5400737461727420636F6F6C696E6700707244
+:103D64006568656174696E6700736F616B00726585
+:103D7400666C6F770048656C6C6F20576F726C646B
+:103D840021007365633A20000D0A0061637469764B
+:023D94006500C8
+:00000001FF
diff --git a/Release/sloeber.ino.cpp.d b/Release/sloeber.ino.cpp.d
new file mode 100644
index 0000000..9ff6776
--- /dev/null
+++ b/Release/sloeber.ino.cpp.d
@@ -0,0 +1,184 @@
+sloeber.ino.cpp.o: ../sloeber.ino.cpp \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h \
+ ../simpleReflowController.h ../MAX31855.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0/TimerOne.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0/config/known_16bit_timers.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/TFT.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_GFX.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_ST7735.h \
+ /home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.h \
+ /home/hendrik/Arduino/libraries/FastLED/FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/cpp_compat.h \
+ /home/hendrik/Arduino/libraries/FastLED/FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_config.h \
+ /home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_delay.h \
+ /home/hendrik/Arduino/libraries/FastLED/bitswap.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixeltypes.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h \
+ /home/hendrik/Arduino/libraries/FastLED/color.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastpin.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_types.h \
+ /home/hendrik/Arduino/libraries/FastLED/./dmx.h \
+ /home/hendrik/Arduino/libraries/FastLED/./FastLED.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h \
+ /home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h \
+ /home/hendrik/Arduino/libraries/FastLED/controller.h \
+ /home/hendrik/Arduino/libraries/FastLED/lib8tion.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h \
+ /home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorutils.h \
+ /home/hendrik/Arduino/libraries/FastLED/pixelset.h \
+ /home/hendrik/Arduino/libraries/FastLED/colorpalettes.h \
+ /home/hendrik/Arduino/libraries/FastLED/noise.h \
+ /home/hendrik/Arduino/libraries/FastLED/power_mgt.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi.h \
+ /home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h \
+ /home/hendrik/Arduino/libraries/FastLED/chipsets.h \
+ ../simpleReflowController.ino ../display.ino ../thermocouple.ino
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/binary.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WCharacter.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/WString.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/HardwareSerial.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Stream.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Printable.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/USBAPI.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/pins_arduino.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs/../standard/pins_arduino.h:
+
+../simpleReflowController.h:
+
+../MAX31855.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0/TimerOne.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0/config/known_16bit_timers.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/TFT.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_GFX.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino/Print.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src/utility/Adafruit_ST7735.h:
+
+/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src/SPI.h:
+
+/home/hendrik/Arduino/libraries/FastLED/FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/cpp_compat.h:
+
+/home/hendrik/Arduino/libraries/FastLED/FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_config.h:
+
+/home/hendrik/Arduino/libraries/FastLED/led_sysdefs.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/led_sysdefs_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_delay.h:
+
+/home/hendrik/Arduino/libraries/FastLED/bitswap.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixeltypes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/math8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/scale8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/random8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion/trig8.h:
+
+/home/hendrik/Arduino/libraries/FastLED/color.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastpin.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_types.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./dmx.h:
+
+/home/hendrik/Arduino/libraries/FastLED/./FastLED.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastled_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastpin_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/fastspi_avr.h:
+
+/home/hendrik/Arduino/libraries/FastLED/platforms/avr/clockless_trinket.h:
+
+/home/hendrik/Arduino/libraries/FastLED/controller.h:
+
+/home/hendrik/Arduino/libraries/FastLED/lib8tion.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastled_progmem.h:
+
+/home/hendrik/Arduino/libraries/FastLED/hsv2rgb.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorutils.h:
+
+/home/hendrik/Arduino/libraries/FastLED/pixelset.h:
+
+/home/hendrik/Arduino/libraries/FastLED/colorpalettes.h:
+
+/home/hendrik/Arduino/libraries/FastLED/noise.h:
+
+/home/hendrik/Arduino/libraries/FastLED/power_mgt.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi.h:
+
+/home/hendrik/Arduino/libraries/FastLED/fastspi_bitbang.h:
+
+/home/hendrik/Arduino/libraries/FastLED/chipsets.h:
+
+../simpleReflowController.ino:
+
+../display.ino:
+
+../thermocouple.ino:
diff --git a/Release/sloeber.ino.cpp.o b/Release/sloeber.ino.cpp.o
new file mode 100644
index 0000000..a4de88b
Binary files /dev/null and b/Release/sloeber.ino.cpp.o differ
diff --git a/Release/sources.mk b/Release/sources.mk
new file mode 100644
index 0000000..9c7f1e3
--- /dev/null
+++ b/Release/sources.mk
@@ -0,0 +1,44 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+INO_SRCS := 
+ASM_SRCS := 
+O_UPPER_SRCS := 
+CPP_SRCS := 
+S_UPPER_SRCS := 
+O_SRCS := 
+ELF_SRCS := 
+C_UPPER_SRCS := 
+CXX_SRCS := 
+C++_SRCS := 
+PDE_SRCS := 
+CC_SRCS := 
+C_SRCS := 
+C_UPPER_DEPS := 
+PDE_DEPS := 
+C_DEPS := 
+AR := 
+CC_DEPS := 
+AR_OBJ := 
+C++_DEPS := 
+LINK_OBJ := 
+CXX_DEPS := 
+ASM_DEPS := 
+HEX := 
+INO_DEPS := 
+SIZEDUMMY := 
+S_UPPER_DEPS := 
+ELF := 
+CPP_DEPS := 
+
+# Every subdirectory with source files must be described here
+SUBDIRS := \
+. \
+core/core \
+libraries/FastLED \
+libraries/SPI/src \
+libraries/TFT/src \
+libraries/TFT/src/utility \
+libraries/TimerOne \
+
diff --git a/Release/subdir.mk b/Release/subdir.mk
new file mode 100644
index 0000000..1ce91c4
--- /dev/null
+++ b/Release/subdir.mk
@@ -0,0 +1,35 @@
+################################################################################
+# Automatically-generated file. Do not edit!
+################################################################################
+
+# Add inputs and outputs from these tool invocations to the build variables 
+CPP_SRCS += \
+../MAX31855.cpp \
+../sloeber.ino.cpp 
+
+LINK_OBJ += \
+./MAX31855.cpp.o \
+./sloeber.ino.cpp.o 
+
+CPP_DEPS += \
+./MAX31855.cpp.d \
+./sloeber.ino.cpp.d 
+
+
+# Each subdirectory must supply rules for building sources it contributes
+MAX31855.cpp.o: ../MAX31855.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+	@echo 'Finished building: $<'
+	@echo ' '
+
+sloeber.ino.cpp.o: ../sloeber.ino.cpp
+	@echo 'Building file: $<'
+	@echo 'Starting C++ compile'
+	"/home/hendrik/bin/sloeber//arduinoPlugin/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10802 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR     -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/cores/arduino" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/variants/eightanaloginputs" -I"/home/hendrik/bin/sloeber/arduinoPlugin/packages/arduino/hardware/avr/1.6.23/libraries/SPI/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TFT/1.0.6/src" -I"/home/hendrik/bin/sloeber/arduinoPlugin/libraries/TimerOne/1.1.0" -I"/home/hendrik/Arduino/libraries/FastLED" -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -D__IN_ECLIPSE__=1 -x c++ "$<"  -o  "$@"
+
+	@echo 'Finished building: $<'
+	@echo ' '
+
+
diff --git a/display.ino b/display.ino
new file mode 100644
index 0000000..be6e133
--- /dev/null
+++ b/display.ino
@@ -0,0 +1,91 @@
+#include "simpleReflowController.h"
+
+TFT myScreen = TFT(TFTCS, TFTDC, TFTRST);
+
+
+
+void initTFT() {
+	myScreen.begin();
+	myScreen.background(0, 0, 0);
+	//myScreen.setTextSize(2);
+}
+
+void clearTFT() {
+	//myScreen.background(0, 0, 0);
+	myScreen.fillRect(0, 0, 160, 128, 0);
+
+}
+
+void setHeader(int pCurrentTemp, int pSec, int pProfileTemp) {
+
+	String sCurrentTemp = String(pCurrentTemp);
+	char cCurrentTemp[3];
+	sCurrentTemp.toCharArray(cCurrentTemp, 3);
+	//Serial.println(cCurrentTemp);
+
+	String sSec = String(pSec);
+	char cSec[3];
+	sSec.toCharArray(cSec, 3);
+	//Serial.println(cSec);
+
+	String sProfileTemp = String(pProfileTemp);
+	char cProfileTemp[3];
+	sProfileTemp.toCharArray(cProfileTemp, 3);
+	//Serial.println(cProfileTemp);
+
+
+
+	myScreen.stroke(255, 255, 255);
+	myScreen.setTextSize(2);
+
+	myScreen.text(cCurrentTemp, 0, 0);
+	myScreen.text(cSec, 55, 0);
+	myScreen.text(cProfileTemp, 110, 0);
+	myScreen.stroke(0, 0, 255); // set the stroke color to red
+	myScreen.line(0, 17, 160, 17); // draw a line across the screen
+	myScreen.line(0, 18, 160, 18); // draw a line across the screen
+
+}
+void setProfile() {
+	myScreen.stroke(255, 255, 255);
+	for (int i = 0; i <= 160; i++) {
+		Serial.println(i);
+		int x = i;
+		double temp = getProfile(i * 2).temp;
+		int y = map(temp, 0, 320, 109, 19);
+		myScreen.point(x, y);
+	}
+}
+
+void setGraph(String pName, int pSec) {
+	char cName[20];
+	pName.toCharArray(cName, 20);
+
+	myScreen.stroke(255, 255, 255);
+	myScreen.setTextSize(1);
+	myScreen.text(cName, 0, 25);
+
+	myScreen.stroke(255, 0, 0);
+	for (int i = 0; i <= pSec; i++) {
+		Serial.println(i);
+		int x = i;
+		double temp = historyTemp[i *2];
+		int y = map(temp, 0, 320, 109, 19);
+		myScreen.point(x, y);
+	}
+
+
+
+
+}
+
+void setStatus(String pText) {
+	char cStatus[20];
+	pText.toCharArray(cStatus, 20);
+	myScreen.stroke(255, 255, 255);
+	myScreen.setTextSize(2);
+	myScreen.text(cStatus, 0, 114);
+	myScreen.stroke(0, 0, 255); // set the stroke color to red
+	myScreen.line(0, 110, myScreen.width(), 110); // draw a line across the screen
+	myScreen.line(0, 111, myScreen.width(), 111); // draw a line across the screen
+}
diff --git a/simpleReflowController.h b/simpleReflowController.h
new file mode 100644
index 0000000..027a9dd
--- /dev/null
+++ b/simpleReflowController.h
@@ -0,0 +1,50 @@
+/*
+ * simpleReflowController.h
+ *
+ *  Created on: 26.10.2018
+ *      Author: hendrik
+ */
+
+#ifndef SIMPLEREFLOWCONTROLLER_H_
+#define SIMPLEREFLOWCONTROLLER_H_
+
+//#include "Adafruit_MAX31855.h"
+#include "MAX31855.h"
+#include "Arduino.h"
+#include "TimerOne.h"
+//#include <SPI.h>
+#include <TFT.h>
+
+#include <FastLED.h>
+//#include "Adafruit_GFX.h"
+//#include "Adafruit_ST7735.h"
+
+
+
+#define MAXSO 12
+#define MAXCS1 6
+#define MAXCS2 7
+#define MAXCLK 13
+
+#define PIEZO 2
+#define SSR1 4
+#define SSR2 5
+
+#define TFTCS 10
+#define TFTDC 9
+#define TFTRST 8
+
+#define NUM_LEDS 1
+
+#define DATA_PIN 3
+#define CLOCK_PIN 13
+
+struct profileStep {
+  int temp;
+  String name;
+  int starttime;
+  int endtime;
+};
+
+
+#endif /* SIMPLEREFLOWCONTROLLER_H_ */
diff --git a/simpleReflowController.ino b/simpleReflowController.ino
new file mode 100644
index 0000000..5a46066
--- /dev/null
+++ b/simpleReflowController.ino
@@ -0,0 +1,154 @@
+#include "simpleReflowController.h"
+
+boolean start = false;
+
+unsigned int uiSec;
+unsigned long timestamp = 0;
+short fuzziness = 5;
+unsigned int historyTemp[320];
+
+CRGB leds[NUM_LEDS];
+
+void setup() {
+	initPorts();
+
+	Serial.begin(9600);
+	Serial.println("Hello World!");
+
+	initTFT();
+	initTermocouple();
+
+	FastLED.addLeds<NEOPIXEL, DATA_PIN>(leds, NUM_LEDS);
+
+	leds[0] = CRGB::Black;
+	FastLED.show();
+
+	start = true;
+	uiSec = 0;
+	timestamp = millis();
+
+}
+
+void loop() {
+
+	while (!start) {
+		//wait for start press and show current temp
+		// wait  for cooling down
+	}
+	//clearTFT();
+
+	if (millis() > (timestamp + 1000)) {
+		timestamp = millis();
+		secIncrease();
+	}
+
+	double currentTemp = getTemp();
+	profileStep currentProfile = getProfile(uiSec);
+
+	if (getTemp() < ((currentProfile.temp) - fuzziness)) {
+
+		leds[0] = CRGB::Red;
+		FastLED.show();
+
+		digitalWrite(SSR1, LOW);
+		digitalWrite(SSR2, LOW);
+
+	}
+
+	if (getTemp() > currentProfile.temp) {
+
+		leds[0] = CRGB::Green;
+		FastLED.show();
+
+		digitalWrite(SSR1, HIGH);
+		digitalWrite(SSR2, HIGH);
+	}
+
+	if ((uiSec % 5) == 0) {
+		clearTFT();
+		setHeader(currentTemp, uiSec, currentProfile.temp);
+		setProfile();
+		setGraph(currentProfile.name, uiSec);
+		setStatus("active");
+	}
+
+}
+
+void initPorts() {
+	pinMode(SSR1, OUTPUT);
+	pinMode(SSR2, OUTPUT);
+	pinMode(PIEZO, OUTPUT);
+
+	digitalWrite(SSR1, HIGH);
+	digitalWrite(SSR2, HIGH);
+	digitalWrite(PIEZO, HIGH);
+}
+
+void secIncrease() {
+	historyTemp[uiSec] = getTemp();
+	uiSec++;
+	Serial.print("sec: ");
+	Serial.println(uiSec);
+	//double testTemp = getProfileTemp(uiSec).temp;
+
+}
+
+profileStep getProfile(int pSec) {
+// from https://www.compuphase.com/electronics/solderprofile-standard-timepoints.png
+
+	profileStep step;
+	step.temp = 0.0;
+	step.name = "404";
+	step.starttime = 0;
+	step.endtime = 0;
+
+	if (pSec == -1) {
+		step.temp = 50;
+		step.name = "start cooling";
+		step.starttime = 0;
+		step.endtime = 0;
+		return step;
+	}
+
+	if (pSec <= 90) {
+		step.temp = map(pSec, 0, 90, 0.0, 150.0);
+		step.name = "preheating";
+		step.starttime = 0;
+		step.endtime = 90;
+		return step;
+	}
+
+	if (pSec <= 180) {
+		step.temp = 150.0;
+		step.name = "soak";
+		step.starttime = 91;
+		step.endtime = 180;
+		return step;
+	}
+
+	if (pSec <= 240) {
+		step.temp = map(pSec, 180, 240, 150, 240);
+		step.name = "reflow";
+		step.starttime = 181;
+		step.endtime = 240;
+		return step;
+	}
+
+	if (pSec <= 270) {
+		step.temp = 240;
+		step.name = "reflow";
+		step.starttime = 241;
+		step.endtime = 270;
+		return step;
+	}
+	if (pSec > 270) {
+		step.temp = map(pSec, 270, 320, 240, 0);
+		step.name = "cooling";
+		step.starttime = 271;
+		step.endtime = 320;
+		return step;
+	}
+
+	return step;
+}
+
diff --git a/sloeber.ino.cpp b/sloeber.ino.cpp
new file mode 100644
index 0000000..6baff2d
--- /dev/null
+++ b/sloeber.ino.cpp
@@ -0,0 +1,31 @@
+#ifdef __IN_ECLIPSE__
+//This is a automatic generated file
+//Please do not modify this file
+//If you touch this file your change will be overwritten during the next build
+//This file has been generated on 2018-10-27 15:37:54
+
+#include "Arduino.h"
+#include "simpleReflowController.h"
+#include "simpleReflowController.h"
+#include "simpleReflowController.h"
+
+void initTFT() ;
+void clearTFT() ;
+void setHeader(int pCurrentTemp, int pSec, int pProfileTemp) ;
+void setProfile() ;
+void setGraph(String pName, int pSec) ;
+void setStatus(String pText) ;
+void setup() ;
+void loop() ;
+void initPorts() ;
+void secIncrease() ;
+profileStep getProfile(int pSec) ;
+void initTermocouple() ;
+int getTemp() ;
+
+#include "simpleReflowController.ino"
+
+#include "display.ino"
+#include "thermocouple.ino"
+
+#endif
diff --git a/spec.d b/spec.d
new file mode 100644
index 0000000..53d8174
--- /dev/null
+++ b/spec.d
@@ -0,0 +1,2 @@
+spec.o: \
+ /home/hendrik/eclipse-workspace/Arduino/.metadata/.plugins/org.eclipse.cdt.managedbuilder.core/spec.C
diff --git a/thermocouple.ino b/thermocouple.ino
new file mode 100644
index 0000000..c5fcee1
--- /dev/null
+++ b/thermocouple.ino
@@ -0,0 +1,28 @@
+#include "simpleReflowController.h"
+
+#define tcUpdateInterval 100
+
+MAX31855 tc1(MAXCS1, tcUpdateInterval);
+MAX31855 tc2(MAXCS2, tcUpdateInterval);
+
+void initTermocouple() {
+	tc1.setup();
+	tc2.setup();
+}
+
+int getTemp() {
+	//TODO Kalman filter
+	tc1.update();
+	tc2.update();
+
+	if (tc1.getStatus() != 0) {
+		Serial.println("Error tc1");
+	}
+
+	if (tc2.getStatus() != 0) {
+		Serial.println("Error tc2");
+	}
+
+	return (int) ((tc1.getTemperature() + tc2.getTemperature()) / 2);
+}
+