Merge pull request #1 from Seil0/patch-1

Update README.md

README.md

@@ -1,22 +1,26 @@
 # TrackFPV
 Use your Fatshark or Skyzone goggles as a virtual reality headset.
 
-Fast overview: Use an Arduino Micro as a Joystick for OpenTrack with the input of your FPV-Headtracker.
+#### Fast overview: Use an Arduino Micro as a Joystick for OpenTrack with the input of your FPV-Headtracker.
 
-Hardware:
-•	Arduino Micro (ATmega32U4 = featuring a built-in USB which makes the Micro recognizable as a joystick)
-•	3,5 mm phone jack from your goggle
-•	Mirroring the Computer-Screen to the goggle with a HDMI to AV converter
+[![IMAGE ALT TEXT HERE](https://img.youtube.com/vi/lgsw95ZyV68/0.jpg)]
+(https://www.youtube.com/watch?v=lgsw95ZyV68)
 
-Software:
-•	install the latest OpenTrack software https://github.com/opentrack/opentrack/releases
-•	install latest Arduino IDE and drivers
+## 1.Hardware:
+-	Arduino Micro (ATmega32U4 = featuring a built-in USB which makes the Micro recognizable as a joystick)
+-	3,5 mm phone jack from your goggle
+-	Mirroring the Computer-Screen to the goggle with a HDMI to AV converter
 
-Libraries used in this project:
-•	Joystick.h https://github.com/MHeironimus/ArduinoJoystickLibrary
-•	CPPM.h https://github.com/jmparatte/CPPM
+## 2.Software:
+-	install the latest OpenTrack software https://github.com/opentrack/opentrack/releases
+-	install latest Arduino IDE and drivers
 
-Installation: 1. prepare Hardware. Ground to Ground and the PPM-Pin to D4 (it´s the ICP-Pin) 
+## 3.Libraries used in this project:
+-	Joystick.h https://github.com/MHeironimus/ArduinoJoystickLibrary
+-	CPPM.h https://github.com/jmparatte/CPPM
+
+### Installation: 
+1. prepare Hardware. Ground to Ground and the PPM-Pin to D4 (it´s the ICP-Pin) 
 2. Install the libraries 
 3. Upload the sketch to the Arduino 
 4. Check if the Arduino is detected from the computer (Windows Control Panel >> Hardware >> Devices >> Arduino Micro